Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Thread: Mazworx SR Head stud/main studs

  1. #1
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0

    Mazworx SR Head stud/main studs

    INSTOCK NOW! READY TO SHIP!


    We are proud to introduce our line of head studs and main studs for the SR. We have to come to realize that the engagement on the ARP off the shelf ones dont thread into the block completely and not bottoming out so it does not giving enough grab. So with these we developed will be the correct length and actually stronger and better material. We estimate an easy 600hp capability.Main differences between the current ARP head studs and main studs material to the material of our headstud kit.

    ARP current head stud/main stud
    8740 CHROME MOLY: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi.

    Mazworx Headstud/Main stud material

    ARP2000: An exclusive, hybrid-alloy developed to deliver superior strength and better fatigue properties. While 8740 and ARP2000 share similar characteristics – ARP2000 is capable of achieving clamp loads in the 215,000-220,000 psi range. ARP2000 is used widely in short track and drag racing as an up-grade from 8740 chrome moly in both steel and aluminum rods. Stress corrosion and hydrogen embrittlement are typically not a problem, providing care is taken during installation.

    Made from ARP2000 material
    12 point
    220ksi tensile strength
    Straight shank/bullet ends from complete bottom out
    Comes with (10) studs, (10) washers, (10) nuts and instructions.

    The main studs WILL CLEAR upper oil pan without machining!

    Head stud comparison. Std ARP off-the shelf, Mazworx Head Studs, Mazworx 1/2"







    Main Stud Comparison

    ARP off the shelf, Mazworx Main







    Head Stud Kit - $235.00USD or $160.16GBP Landed!
    Main Stud Kit - $235.00USD or $160.16GBP Landed!

    Purchase both at the same time $415.00USD or $282.84 Landed!

    Buyers:
    #1 thedazman67 Head/Main
    #2 ex-ctr Head/Main
    #3
    #4
    #5
    #6
    #7
    #8
    #9
    #10




    Please PM us if you have any questions. We will link to our new group buy section once its set up
    Last edited by MazworxRacing; 23-06-2009 at 15:19.
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  2. #2
    Everything must go MattyGee's Avatar
    Join Date
    Jan 2002
    Location
    JAPOKYO! cos im made of special! (Nuneaton)
    Posts
    28,468
    Rides
    0
    please keep trade posts to your section please, thank you
    Its gone!

  3. #3
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Sorry just wanted to get some information out there.

    Thanks for the move.
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  4. #4
    Guest
    Join Date
    May 2006
    Location
    Just outside Dundee
    Posts
    5,450
    Rides
    0
    These sound good to me, as i was on the hunt for ARP kits.
    Could you post what these will cost in our currency, think it will help sales from this end.

    Cheers Aj

  5. #5
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Thanks I added the information on currency in the thread.
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  6. #6
    Guest
    Join Date
    May 2006
    Location
    Just outside Dundee
    Posts
    5,450
    Rides
    0
    Many thanks and good prices, will be in touch at the end of the month hopefully.

    Cheers Aj

  7. #7
    Guest
    Join Date
    Nov 2007
    Location
    Warrington
    Posts
    1,027
    Rides
    0
    sign me up ill have a set of both please. Do you require any deposit, when do you need full payment?

  8. #8
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Ill put you on the list, Ill let you know when we will require the deposit...Cheers!
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  9. #9
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    2 more weeks and they will be here
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  10. #10
    Guest
    Join Date
    Nov 2007
    Location
    Warrington
    Posts
    1,027
    Rides
    0
    Awesome pm when you require payment. Out of interest what method of payment do you accept

  11. #11
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Credit card, Paypal or wire transfer
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  12. #12
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    im after a complete set [head and mains]along with supertech titanium retainer/ spring seat set for the double spring set i had off you, could you pm me a price for the lot

  13. #13
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Quote Originally Posted by ex-ctr View Post
    im after a complete set [head and mains]along with supertech titanium retainer/ spring seat set for the double spring set i had off you, could you pm me a price for the lot

    You've got PM thanks!
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  14. #14
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    Quote Originally Posted by MazworxRacing View Post
    You've got PM thanks!
    put me on the list if its 2 weeks for the studs to come in drop me a pm when there ready and i will pay for the lot at the same time[paypal]

  15. #15
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Quote Originally Posted by ex-ctr View Post
    put me on the list if its 2 weeks for the studs to come in drop me a pm when there ready and i will pay for the lot at the same time[paypal]
    Will do thanks!
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  16. #16
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Head stud comparison. Std ARP off-the shelf, Mazworx Head Studs, Mazworx 1/2"







    Main Stud Comparison

    ARP off the shelf, Mazworx Main



    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  17. #17
    Guest Dobergoose's Avatar
    Join Date
    Aug 2002
    Location
    Kirkintilloch
    Posts
    6,216
    Rides
    0
    I used SR20 ARP main studs as CA head studs. At the time ARP didn't list any CA stuff. They didn't bottom out either I don't think(it was a few years ago now) so you might be able to sell these to the CA crowd also.

  18. #18
    Guest
    Join Date
    May 2006
    Location
    Just outside Dundee
    Posts
    5,450
    Rides
    0
    I will be after a set of these from you guys, but will also be ordering a few other bits at the same time aswell. Will be in touch again soon.
    Meanwhile, free bump!


    Cheers Aj

  19. #19
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    hi, does the head need machining for the 1/2" head studs, and which of the head studs are in the group buy is it the 1/2" or your normal head studs also the arp mains look thicker and shorter than yours and they foul the sump have you mixed up the pictures
    im working away from home at the moment but will sort out my order with you as soon as im back home, a week at the most if thats ok

  20. #20
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Yes you will have to machine both head and block for 1/2". This is a group buy for non 1/2" parts. These will drop right into a regular SR.

    Its probably the picture. The mains are exact thickness but longer and bullet nose than the off the shelf items. With our mains, you WILL NOT have to machine your upper oil pan for clearance.
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •