Mazworx VG/Z32 Transmission Adapter Kits

[MazworxRacing]

Also is the C,s short shifter available with it instead of the other type?

Nope sorry we only have our shifters available.

[Drifter]

C's shifter for the Z32 is discontinued last time I checked. Ben Taylor was lucky enough to get the only 1 of the 3 I ordered.

[DeanS15]

does this work with the sr20det clutch and flywheel - ie does the z32 box input shaft just slot into the sr clutch? also i know you provided a pic of the shifter position but are there any with the gear surround fitted as i have heard that the surround *may* make selecting 2nd and reverse difficult....

thanks.
dean.

[R360-200SX]

Thanks for the reply, also could you answer this.... is the C,s short shifter available with it instead of the other type?

[MazworxRacing]

Thanks for the reply, also could you answer this.... is the C,s short shifter available with it instead of the other type?

Hehehe I think I answered that one up top the first post on this page....

Only our shifter is available.

[MazworxRacing]

Yes SR flywheel and clutch assembly is what is used.

This is in neutral position



This is in 2nd gear position

does this work with the sr20det clutch and flywheel - ie does the z32 box input shaft just slot into the sr clutch? also i know you provided a pic of the shifter position but are there any with the gear surround fitted as i have heard that the surround *may* make selecting 2nd and reverse difficult....

thanks.
dean.

[R360-200SX]

Ooops, didnt see that, lol thanks, il be ordering a kit next week, i have an adaptor plate made out of steel so would it be possible to buy the alu prop and the rest of the kit with out the adaptor plate. sorry to be a pain but could you give me a price for that delivered to northern ireland. also can you supply the speed convertor/sensor

[MazworxRacing]

Ooops, didnt see that, lol thanks, il be ordering a kit next week, i have an adaptor plate made out of steel so would it be possible to buy the alu prop and the rest of the kit with out the adaptor plate. sorry to be a pain but could you give me a price for that delivered to northern ireland. also can you supply the speed convertor/sensor

If the plate is not exactly the same as ours, Im not sure if the crossmember and shifter bracket will sit in the same place.

[kkydd]

I have one of these kits they are excellent! Although my prop is a bit noisy.

Will drop you a pm about some bits and bobs soon.

[R360-200SX]

Ok thanks for the info. il prob just buy your whole kit then, just i had read about issues with the threads pulling out of the aluminium plate (hence why i wanted a steel one) and that the shifter had issuses and was best to get the C,s shifter.

[200sxkids13]

Why auto?

Our kits are only made for Z32 5spd transmissions.

Because some people cant drive manuals for versious reasons but doesnt stop them having a high power car....

[MazworxRacing]

Ok thanks for the info. il prob just buy your whole kit then, just i had read about issues with the threads pulling out of the aluminium plate (hence why i wanted a steel one) and that the shifter had issuses and was best to get the C,s shifter.

Hmm that's news to me. Both issues I have never heard before and these things have been out and about for years now.

[danb]

what are the advantasges of stainless/carbon shaft over the steel one??

also what sort of power are the boxes rated too??

[Robdriftit]

i also am running one of these kits no problems at all, you do get used to the position of the shifter, it atcually looks worse in the above pics than it is when you have the console all back together. My shifter does rattle a bit, but only at high RPMs 5.5K+ but to be honest if you cant put up with a little rattle at that sort of pace, a very modified car is probally not for you!

The Z32 boxes are good for 600hp i belive

[danb]

how was the fitting rob - easy enough??

[Robdriftit]

didnt do it mate, came with the car, looks fairly straightforward though

Probally will take 30mins or so longer, but its no different than fitting a standard gearbox in principal once you have bolted the adaptor plate in!