What kind of products are you looking for?

**MazworxRacing** · 03-04-2009, 14:01

I see that we've put up a few things but not much interest on them. Just let us know what you guys are looking for and we can try to provide it for you.

Thanks!

**Pablo13** · 03-04-2009, 14:08

Id like too see some CA based headwork that will allow for 8k rpm and over.

Oh and welcome

**ex-ctr** · 03-04-2009, 14:36

dry sump set up for an sr20det

**MazworxRacing** · 03-04-2009, 14:37

Originally Posted by ex-ctr

dry sump set up for an sr20det

Full out race car? Running alternator?

**ex-ctr** · 03-04-2009, 14:43

Originally Posted by MazworxRacing

Full out race car? Running alternator?

i can move the alternator as do need one

im not using aircon or power steering so there's room to reposition, im also using an ATI main pulley so i can bolt a drive wheel to that

**MazworxRacing** · 03-04-2009, 15:13

Originally Posted by ex-ctr

i can move the alternator as do need one

im not using aircon or power steering so there's room to reposition, im also using an ATI main pulley so i can bolt a drive wheel to that

What chassis is it in?

Im pretty sure we can put together a dry sump setup for you no problem.

Here is a look at the setup in our S15 drag car.

**ex-ctr** · 03-04-2009, 15:28

S14 shell, so thats where i got my exhaust manifold idea from, my hx35 sits in the same place as your monster turbo

also how much roughly will it cost

**MazworxRacing** · 03-04-2009, 16:06

Originally Posted by ex-ctr

S14 shell, so thats where i got my exhaust manifold idea from, my hx35 sits in the same place as your monster turbo

also how much roughly will it cost

Ok. That's actually the "smaller" turbo. The one on there is bigger now

Ill put something together for you and PM you in a bit.

**ex-ctr** · 03-04-2009, 17:34

Originally Posted by MazworxRacing

Ok. That's actually the "smaller" turbo. The one on there is bigger now

Ill put something together for you and PM you in a bit.

and the pound seems to be getting stronger against the dollar

**DREAD13** · 03-04-2009, 18:46

A stroker kit for the CA18DET!

**MazworxRacing** · 03-04-2009, 19:19

Originally Posted by DREAD13

A stroker kit for the CA18DET!

If there is enough request for it, sure why not?

**kingj** · 04-04-2009, 07:35

Do you/can you do any deals on alloy wheels in good width and offsets? 5zigen,xxr,cst etc? basically ones we dont really get over here unless we pay silly money for! but are cheap in the USA, new or used

Yes we can get wheels. Just let us know what you are looking for

**Aj82** · 04-04-2009, 07:43

Possibily a nice polished and shaped inlet manifold similar to the Ikeya ones? Just an idea as im guessing these could be just as expensive as the Ikeya ones but i would be interested.

Cheers Aj

**ex-ctr** · 06-04-2009, 17:01

Originally Posted by MazworxRacing

Ok. That's actually the "smaller" turbo. The one on there is bigger now

Ill put something together for you and PM you in a bit.

have you managed to work out any details/price yet

**MazworxRacing** · 06-04-2009, 21:39

Originally Posted by ex-ctr

have you managed to work out any details/price yet

Working on it as we speak should have a quote real soon

**adzn2k** · 10-04-2009, 07:49

rb20det stuff like forward facing intake manifolds, conrods and pistons

**ex-ctr** · 13-04-2009, 20:32

what 1000 top feed injectors do you do, also intrested in a fuel rail

**MazworxRacing** · 14-04-2009, 19:38

Originally Posted by ex-ctr

what 1000 top feed injectors do you do, also intrested in a fuel rail

We have RC Engineering injectors for top feed.

Ill double check to see if our fuel rail will work.

**ex-ctr** · 14-04-2009, 19:46

Originally Posted by MazworxRacing

We have RC Engineering injectors for top feed.

Ill double check to see if our fuel rail will work.

i was thinking of RC injectors

**SILBEAM** · 15-04-2009, 15:37

can u tell me how much for just the dry sump oil pan and will it fit rwd sr or is it for the fwd sr as thats whats in your car is it not ..thanks

Thread: What kind of products are you looking for?

Thread Tools

What kind of products are you looking for?

Posting Permissions