need 15mm spacers for my s13 on the front.
got longer studs allready.
any ideas?
need 15mm spacers for my s13 on the front.
got longer studs allready.
any ideas?
hello mate, should be able to get you some gime a call around 5ish on 0845 3459755. i work at potn
That number is coming up with many results... (e.g. pug specialists / alloy wheel vendor / Brakes suppliers) which company are you?
Matthew
halfords and any decent motor parts place sell them.
http://www.halfords.com/webapp/wcs/s...el+Accessories
I got my H&Rs from SRB Power
Be careful with those ebay spacers. People on DW have had studs snap!
Its definitely worth paying the extra for the german ones (eibach or H&R)
Ahh OK then, good good!
H&R here, and they are but quite £££
Some spacers bolt on to your studs/extended studs, but have studs of their own to bolt the wheel on to, ie:
This is how my 25mm H&Rs work.
The studs on the cheap ebay spacers have been known to fail. I wasnt talking about his needs specifically, but just a general warning to everyone about ebay spacers
Check these links:
http://www.driftworks.com/forum/628068-post6.html
http://www.driftworks.com/forum/628666-post11.html
Last edited by Quail; 10-06-2008 at 18:58.
I'll get me coat
i have some brand new 15mm H&R hub centrics sat in my house that are yours for 50quid (s13)
I've got eibach 15mm on the rear of my 13 and 20mm on the front - they were about £80 each from demon thieves!
The spacers aren't for running S14 calipers under standard alloys are they? I initially thought 15mm would be enough, but unfortunately I had to go to 20mm