Well then the Swede is on top!
We have a 890bhp (flywheel) MADtech s14a
and my friends 540whp s14a (did a 10second time on 402m with hks coilovers) that was when the car wasnt mapped properly just mapped on 99RON but he drives Ethanol E85, by the way it was running standard gearbox
Hurry up & get your arse down this way matey, I NEED to see this car in the flesh
Almost makes me want an SR...
Plenty of space left at the East Mids Rolling Road Day
dont you fricking dareOriginally Posted by Noz
Hurry up & get your arse down this way matey, I NEED to see this car in the flesh
Almost makes me want an SR...
Plenty of space left at the East Mids Rolling Road Day
lovely car bling! you might have to pop down to hull sometime withdave and nelson
I'm not a big ford fan but the RS500 is a legend, you cannot take away from it its Icon status and to suggest that its a chavvy car is like saying Kirsten Scott Thomas is a council estate slapper
im sure if you work at e.c.c. then you just need to ask andrew
He dosent think that the standard block will take anymore than 450bhp, but im curious to see how far an sr can be pushed. dont wana go 2.2 yet lol so thats why i wanted to know. thanks
Last edited by R360-200SX; 18-02-2008 at 18:20.
keep an eye on dans car above,this is the trouble in the uk there are very few 500bhp cars
a couple of ones we have built run hks liners,dans is furthest we have gone with out them
but as with pushing broundarys in tuning its all a risk....
---------------------------------------------------
Automotive Performance Tuning - Tel:01603 870990
Email: sales@ap-tuning.co.uk
FAST ROAD SPEC SR20'S from £3200 Details Here
Power FC Mapping - **Current remap deal!**
i have faith, i have baby jesus on my side
No baby jesus there mate, in that car theres only the devil in the passenger seat keeping you company
i wonder how many driveshafts its going to chew through?
If the Standart block wont take 500HP, it wont be because of the liners.
Liners are only relevant if you are trying to go over 86.5 / 87 mm bore, or are trying to fix a damaged liner.
Show me one block, that gave out because of a liner (beeing the block was not cracked or something, before).
There is no reason a liner should give out because of power, unless there is some other problem.
Allso, as i took the time, and photos that i posted here somewhere, to check the OEM liners thikness - I can tell you that the HKS's Liners, or Darton liners, bored to 87mm , are almost the same thikness as the OEM ones.
BTW, wont norris design's have some powerfull SR's in there resume ???
It is indeed lovely but it don't half make your ears hurt when it's being ran up about 20 feet away from where you're stooddont you fricking dare
lovely car bling! you might have to pop down to hull sometime withdave and nelson
Enigmas is a Norris car iirc
Enigma's is one of theirs
EDIT: Dammit you beat me to it Drifter
Its gone!
Who is "Enigma" ? Any pics/info on the car ?
http://www.sxoc.com/vbb/member.php?u=238
Thats all there is, he's not a full member. I saw his car in Jap Performance ages ago
just found this car as well.... whos is this ?
http://www.sxoc.com/vbb/showthread.php?t=223327
Eyeballpaul I think, its dead now though, was crashed then broken for parts
Edit, heres the for sale thread http://www.sxoc.com/vbb/showthread.php?t=293027
Last edited by Ken; 19-02-2008 at 07:57.
Had A passanger ride in Enigmas car on a top speed run a couple of years ago thanks to Sy at SRBhttp://www.sxoc.com/vbb/member.php?u=238
Thats all there is, he's not a full member. I saw his car in Jap Performance ages ago
Was a bit quick
Theres a guy I met recently who we sold a new rolling shell to who had over 500 bhp from his Sr20.
Normally I wouldnt have believed it but he had a dyno vid of it at Thor and some pics of the dyno run and print out on his phone.
I was a very serious car, apparently he had just finished having it mapped at Thor and was on his way back home in the wet when 500 bhp and wet wheather got the better of him. Hence needing a new shell.
It was a Marlin s14 and I guess it should be about soon again.
He doesnt get on any forums though
Great stuff mate, pleased for you. The 3076 is doing the buisness then! I will be really interested to see the graphs when its done, how much more power are you/APT expecting when the fueling is sorted? Would also like to know when you are getting full boost with the twin scroll.
Regards,
Great stuff mate, pleased for you. The 3076 is doing the buisness then! I will be really interested to see the graphs when its done, how much more power are you/APT expecting when the fueling is sorted? Would also like to know when you are getting full boost with the twin scroll.
Regards,
dunno mate, haven't seen any graphs my self...just letting APT do there thing with the mappingand i sit here with my fingers crossed, cant see it going a lot more tho unless we put the .82 housing on it but I'm not sure if that's just being greedy or not lol
Posting Permissions
Reply With Quote
