Alloys will they fit ?

[The1Nick]

Hi all,

I am looking at a set of 18" 225.

I know nothing about alloys.

Will these fit on a s14a without, and i am just throwing out some words here that people use when talking about alloys - I dont really know what they mean - wheel arch rolling, spacers etc.

Please let me know, as 18s sound big to me

Cheers

Nick

[dannyb1986]

depends on offset, 18s fit, but all depends on offset! should be stamped on the wheel somewhere, it will say et?? something

[dan e]

You need to know more than 18" with 225 wide tyres. Are they 5x114.3 stud pattern? how wide? what offset? what profile tyre?

[The1Nick]

4x114


does that mean something??

but they are off a s14a so stud should be ok

i am wondering if it going to be difficult / costly to get them on

[JockeW]

no they dont fit, you have 5x114.3!

[Dan@DB-Power]

if they are 4x114.3 (4 stud) then they are more than likely off an early jap import silvia, and won't fit your S14a

[Sykes]

Hi mate you need 114.3et 5 stud for 18s and by chance I am selling somehttp://www.sxoc.com/vbb/showthread.php?t=302835 . They where on my 200sx before I sold it

[Matt_S]

Offset and fitment is all relative to wheel design. I have some deep dished 9 x 18s that are ET15. Fine you may think, but I need to fit minimum 12mm spacers on the front for the spokes to clear the std calipers! Then you need the arch clearance to actually be able to run a 9" rim with effective offset of ET +3 , which I have with 225s

[The1Nick]

Hi mate you need 114.3et 5 stud for 18s and by chance I am selling somehttp://www.sxoc.com/vbb/showthread.php?t=302835 . They where on my 200sx before I sold it

afraid not , but i may aswell give the game away:

http://www.sxoc.co.uk/vbb/showthread.php?t=303218

Never really planned on getting alloys for my 200 but these do look good to me.
So will they fit no problem?? from the looks of it no?!

Or will someone else buy them aftere seeing this, probably.

Thanks for the the replies gang

[Matt_S]

Errm mate WTF are you on about? Theyre on a 14a, you have a 14a.

Whats the problem/question???

[BigD]

Errm mate WTF are you on about? Theyre on a 14a, you have a 14a.

Whats the problem/question???

looks like its a na though so 4 stud, you have to look close to see.

[The1Nick]

Errm mate WTF are you on about? Theyre on a 14a, you have a 14a.

Whats the problem/question???

Which leads nicely onto

looks like its a na though so 4 stud, you have to look close to see.

thanks

Yep they are on a s14a, but as i said I dont know anything about alloys / spacers / offsets etc . Just because they are on a s14a to me that does not mean that they will go staright onto MY s14a with no issues

They do look like 4 stud cant really see in the pic, will send a PM - but not expecting a positive answer - oh well

Thanks for looking at this for me peeps...........