looking good mate, I like the idea of the electric ancillaries to reduce the losses on the enginekeep up the effort, I'm looking forward to seeing this as it gets further towards completion
![]()
things are moving again, got the vems harness nearly finished just waiting for some connectors from ebay so i can connect up some relays as im not using any nissan harness only an ignition live to switch a couple of relays supplying a fuse box making the whole thing independent![]()
in the middle of making my own dash,[1mm ns4 aluminium very hard but lite] looking to cover it with carbon fibre
![]()
still got loads to do to itthe hole in the passenger side is for the vems and the hole on the drivers side will hold temp and pressure gauges
and a few other pics of the mountain im trying to climb![]()
![]()
nicely done with the dash.wondered wondered what you'd been up to
![]()
bit of an update, been working 7 days a week so not got much done![]()
sorting out the z32 conversion, oils really clean and it looks like its never been changed as the plugs where a bitch to remove and its ment to have done around 20k
conversion plate thanks to drifter
front prop section is a standard/z32 combo
just needs welding
![]()
going charge cooler route, just mocking it all up
the cooling rad is to small so its a visit to a motor bike breakers![]()
![]()
done a bit more, made up the new boot out of 1mm thick ns4 aluminium which is a very hard alloy
i want it as low as possiable which means the bottom or the bumper skirt so i clamped some angle as a guide
fab'd some pannels
fitted floor of boot
fuel tank sits nice and low close to the diff, it needs turning 180' so the fuel pipe exits the boot on the drivers side
it just needs glue and rivets lotus style to hold it all together![]()
awesome work there, how close to the bottom of the boot floor to the road?
ah i see now
as usual very good work chap
i can do bthis to the boot as im going for twin side exit exhausts
![]()
twin side exit as in two of those pipes side by side or as in one outlet each side of the car???
fantastic work mate![]()
Amazing stuff!!!
Is that a Mazworx conversion plate for the Z32 box?