looks like a nice collection of parts you've gathered!
looks like a nice collection of parts you've gathered!
That manifold looks cool. Looks like it mounts lower than I expected though, is that the reason for the fuse box mods? Is the Throttle body still in the original location or has this also moved? I dont understand the thermostat propblems either
the hole lot is lower down, hens the new cold pipe. the temp sensor goes in the bottom of the manny hens the thermo housing in the way
the tb has droped and turned toward the wing, i could have moved the fuse box over a bit but went for max room instead, you have 2 temp sensors you need to screw into the manifold but the clash with the thermostat housingOriginally Posted by 200krisx
That manifold looks cool. Looks like it mounts lower than I expected though, is that the reason for the fuse box mods? Is the Throttle body still in the original location or has this also moved? I dont understand the thermostat propblems either
so i have pluged them and will either drill and tap the side or fit an adapter in the hose
pic of the unpluged sensor holes
good thread what sort of power u looking for and what make off pistons and rods are they
mani looks good. i'll look forward to see how the car runs with it
well you need dedication to own an sxthis past five days i have derusted and por-15 the interior, striped the rear and black wax-oiled it including the wheel arches, 5L can in a bucket of hot water and a hand spray gun does a great job, just need to get it out of my ears
fitted adjustable camber and toe arms, bolted in roll-cage [welded in support plates at the weekend]
pics to follow
What cage? any pics?
Those are CP pistons www.cppistons.com US brand, and highly respected in the US... Just added a set to my CAwhat make off pistons and rods are they
Looking good ex-ctr keep it comming
I was looking at that mani on ebay aswell!!! Its a Jun replica... very nice! They do two versions... one with top feed injectors and ones in original position... What powerfc did you get? D-jetro?
d-jetro
Do they come with the map sensord-jetro
got it from nengun and you order the map sensor and harnesses separatelyDo they come with the map sensor
just need to pop to mazda for a temp sensor
Nice shiney partswell had to mod the fuel rail but it fits and made a suport that also holds my avcr, d-jetro and water injection sensors
One query about the above picture. Not sure weather in practice it will really matter though...
In the AVC-R manual it says the boost sensor should be monted with the diaphragm or what ever is in the plastic bit horizontal. So the part you fix the boost hose on points vertically downwards.
Edit: Just had another look at the picture, and it doesn't look like they are fixed in
so this might be irrelivant.
Last edited by Bayside Blue; 14-01-2007 at 18:32.
moving the sensors to the inner wing as vibration from the engine might cause damageNice shiney parts
One query about the above picture. Not sure weather in practice it will really matter though...
In the AVC-R manual it says the boost sensor should be monted with the diaphragm or what ever is in the plastic bit horizontal. So the part you fix the boost hose on points vertically downwards.
Just checking
I sooo need to start thinking about catching the rust on my car before its too late.
Whats next?!?!
Last edited by Bayside Blue; 14-01-2007 at 18:36.
one of these babys http://www.daviescraig.com.au/main/display.asp?pid=47Just checking
I sooo need to start thinking about catching the rust on my car before its too late.
Whats next?!?!
Last edited by ex-ctr; 14-01-2007 at 21:21.
So do i mate, gonna strip the front end down this summer before i get my damage repaired in th ebodyshop.
Job is coming along nicely ex-ctr. That link don't work for me though.
some how a
rust is killed both inside and out, still need a bit more paint inside though, fitted castor and toe arms
rollgage is in
Posting Permissions
Reply With Quote
