Page 55 of 64 FirstFirst ... 5455354555657 ... LastLast
Results 1,081 to 1,100 of 1270

Thread: my car rebuild thread

  1. #1081
    Flamethrower Jez's Avatar
    Join Date
    May 2001
    Location
    Chieveley, Near Newbury, Berkshire
    Posts
    22,379
    Rides
    0
    Looking good mate

    I'd definately get the cam sensor sorted - you'll be able to run seq injection and not wasted spark.

    Good luck with the wiring, it takes ages - pay special attention to grounding and shielding sensor wires or yo'll get noisey signals and things wont work properly.

  2. #1082
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    thanks for the kind words, i need to get to one of you instruction days, pity you dont do link, chose it in the end down to being diy install, got thor a couple of miles from me but not sure on there mapping skills and i know your good,
    the cam syncs not a problem just dont know if it should be ''seen'' befor or after the crank signal, also i now have a Sun ls2000 scope to help me set it all up, cam, crank and abs cables are all shielded, got the sensors and cable off trigger-wheels
    bodger extraordinaire

  3. #1083
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    after much head scratching on how to make a cam sync i got hold of a PRIMERA p11 2.0 SR20DE DISTRIBUTOR and choped it up, welded on a aluminium bracket and got to this, needed to chop a hole in the fire-wall which i will box in to make it fit now i just need to decide where the trigger tooth needs to be welded for the link ecu



    im thinking around 45' btdc which will be 22.5' due to a 720' cam rotation per 360' crank rotation
    bodger extraordinaire

  4. #1084
    Flamethrower
    Join Date
    Feb 2009
    Location
    USA
    Posts
    1,127
    Rides
    0
    Just curious, why didnt you just use this to take care of the issue?


    http://www.mazworx.com/product/elect...all-sensor-kit
    Injector Dynamics Injectors. We are your #1 source! Best injectors on the market, PERIOD!

    http://www.sxoc.com/vbb/showthread.php?t=489952


    Mazworx SR 91mm & 92mm stroker crank and stroker kits now available!

    http://www.sxoc.com/vbb/showthread.php?t=437005


    Mazworx "Street Series Top Mount Manifolds! Starting @ 799.00!USD! Full GT3076R Turbo Kit 3299.00USD SHIPPED! Both available NOW!

    http://www.sxoc.com/vbb/showthread.p...36#post4725436

    http://www.sxoc.com/vbb/showthread.php?t=435546


    www.mazworx.com
    Email/Paypal address sales@mazworx.com AIM: mazworxsales MSN:sales@mazworx.com

  5. #1085
    Flamethrower Jez's Avatar
    Join Date
    May 2001
    Location
    Chieveley, Near Newbury, Berkshire
    Posts
    22,379
    Rides
    0
    I could map link no probs - although I've only had a quick mess about with it, but all the theory is the same. I've not checked but the cam signal angle shouldn't matter and should be configurable in software. It'd be worth checking though.

    360 deg cam = 720 crank. Not the other way around.

  6. #1086
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    Quote Originally Posted by MazworxRacing View Post
    Just curious, why didnt you just use this to take care of the issue?


    http://www.mazworx.com/product/elect...all-sensor-kit
    already have a crank sensor but im also using a cam sensor to sync cylinder 1

    Quote Originally Posted by Jez View Post
    I could map link no probs - although I've only had a quick mess about with it, but all the theory is the same. I've not checked but the cam signal angle shouldn't matter and should be configurable in software. It'd be worth checking though.

    360 deg cam = 720 crank. Not the other way around.
    brain not working as im doing 7x12hr shifts on nights just getting all the wireing done over the next couple of months then go from there, do you still use Thors R/R
    bodger extraordinaire

  7. #1087
    Guest 59bhp's Avatar
    Join Date
    Jan 2007
    Location
    the five consecutive hairpins
    Posts
    2,907
    Rides
    0
    sorry to drag up an old subject but what release bearing and pedal box are you using?

    cheers
    mike

  8. #1088
    Flamethrower Jez's Avatar
    Join Date
    May 2001
    Location
    Chieveley, Near Newbury, Berkshire
    Posts
    22,379
    Rides
    0
    Quote Originally Posted by ex-ctr View Post
    just getting all the wireing done over the next couple of months then go from there, do you still use Thors R/R
    We've got our own rolling road all setup and running now

  9. #1089
    Guest -ghost-'s Avatar
    Join Date
    Jul 2011
    Location
    england
    Posts
    5,454
    Rides
    0
    is it running now?

  10. #1090
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    Not running yet as I'm working out of town. Hopefully by Christmas as its all down to wiring the ecu in and the various pumps so a good job for winter
    bodger extraordinaire

  11. #1091
    Guest
    Join Date
    Apr 2003
    Location
    scarborough
    Posts
    1,351
    Rides
    0
    Updates please, still keeping eye on this

    Dan

  12. #1092
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    electrics to do, got everything to finnish getting it running but time, its stored in a dehumidified garage which keeps all good, will get it going asaic
    bodger extraordinaire

  13. #1093
    Guest
    Join Date
    Feb 2013
    Location
    Havant
    Posts
    2
    Rides
    0
    Hows this looking? Been following it for ages!?!?!

  14. #1094
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    Other things have taken priority. Should be up and running by July
    bodger extraordinaire

  15. #1095
    Member
    Join Date
    Dec 2004
    Location
    coventry
    Posts
    8,375
    Rides
    0
    Other things have taken priority. Should be up and running by july
    bodger extraordinaire

  16. #1096
    Guest -ghost-'s Avatar
    Join Date
    Jul 2011
    Location
    england
    Posts
    5,454
    Rides
    0
    Please tell me its running?

  17. #1097
    Guest -ghost-'s Avatar
    Join Date
    Jul 2011
    Location
    england
    Posts
    5,454
    Rides
    0
    is it running? I want to see how you get on and what power you get.

    really thinking about doing a sr22vet in the rx8

  18. #1098
    Guest -ghost-'s Avatar
    Join Date
    Jul 2011
    Location
    england
    Posts
    5,454
    Rides
    0
    What happened to this?

  19. #1099
    Guest spice_weazle's Avatar
    Join Date
    Oct 2004
    Location
    nottingham
    Posts
    3,484
    Rides
    0
    I can see this going the same as Jesus ninjas car. I hope it does get finished some day though.


    Sent from my iPhone using Tapatalk

  20. #1100
    Guest -ghost-'s Avatar
    Join Date
    Jul 2011
    Location
    england
    Posts
    5,454
    Rides
    0
    I really hope not I liked the way it was so different from everyone else's build.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •