coming on well mate
coming on well mate
Well another box from the states arrived today
My prothane bushing kit
and **** me I did not realisethere wer e so many bushes on my car
rear sway bar
FRT strut rod kit
rr track arm kit
front c-arm kit
rear control arm kit
rear end link
sway bar bush
end link set
sway bar bushx2
the rear control arm set has 16 bushes in it alone this could be a challenge doing on the drive
now all i have to do is figure out where everything goes
will i have to re use some of the emtal inserts tha are already on the car?
couple of other parts ordered
water temp and volt gauge. to go woth my oil temp and pressure ones
Cracking project
OK new parts ordered
Blitz Front Brake pads
TRD Engine Mounts
Cusco GearBox mounts
Paz's old front end
Started to fit the protane bushing kit today, going well, apart from my dad setting himself on fire he forgot the low toarch was on and stood over ot then proceded to go on fire
.
Lucky he was wearing a tracksuit. Imagine if he had been wearing a shell suit!
*booom-*
Butuz
2 words are enough here!!!!!
Deep Repect
Bloody hell....im still in love on the AE86 a friend of mine imported from the UK. Complete driftspec in Panda colours....blinkin hell wot a damned nice car that was....
This one is even more stunning mate. Love that colour
ok couple more updates
my dad has started to panel the rear of the car off, instead of putting any trim back in just going to panel it in with wood, and felt it.
fitted a second fusebox, so i can can tidy the wiring up some in the engine bay
2 new guages, Water Temp, and a volt gauge
the leak from the rear lights has been sorted
some more new parts arrived
TRD engine mounts
and the Cusco Gearbox mount
Blitz brake pads
car is now fully pollybushed
my plans for the engine have changed slightly,
I now plan to build a 10k RPM race engine, but that is way in the future
the procam camshafts, with al lthe upgrades from the drop down menus
the reytec d1 ecu and coilpack kit
the forged crankshaft
4ag forged pistons
metal exhausr gasket
strenghtened flywheel bolts
metal headgasket
most of the stuff is in this link here
http://www.tougeten.com/86/index.php...52f91cddcc80ac
at the minute I still dont have my Diff back, and th dash is still in the greenhouse, although it has all been sorted
Looks really good mate
looks well nice cant wait to see it when its finished! keep up the good work mate
yeah
will have my diff back next week
its only been over 2 months
so can get the car all built up and ready to rock again
need to go take it for an MoT as well, that ran out on ther 31st Jan
114 mile round trip for that
to the only guy I trust to MoT the car for me, I trust very few with the keys to the car after what happened to the white one.
as for paneling the back off, I did get it done very very very thin MDF and accoustic felt
need to put the dash back in
seats, clocks
wire guages up
refit drive shaft
diff and pumpkin
halfshafts
tyres on wheels
and MoT tax and insure the car
that looking sweet
keep it up boyo
Love it
well
it has been 2 months since the car last started and about 4 months since i have driven her
today i filled the radiator up and got her started, god what a sound, i missed that so much, the rumble from the exhaust, the sweet sound of a 4A-GE
here are some pics of the rear
my fave toyota- v nice
That is one tastey AE86 there fella, keep uo the good work!!
You can never have to many pics of one!
Im totaly envyious of you lol
cool project - looking good mate
cheers bud appreciate that comment
after almost 4 months my new diff arrives home tomorrow al kitted and built up and ready to be fitted to the car
interior is getting all sorted in my next 2 days off, IE putting the seats and dash back in.
fitted since car went off the road
full prothane bushing kit
water and oil temp, oil pressure and volt guages
fixed my dash
fixed dash lights
light weight alternator pulley
twin electric fans, along with a thermostatic controll switch in place of viscous
4 point harness'es
sorted all cabling out
greddy radiator pipe
TRD 2Way LSD
Helix cerametalic Paddle clutch and larger 212mm flywheel
new Crown and Pinion
still waiting to be fitted
TRD Engine mounts
CUSCO gearbox mount
Blitz brake pads
plans for end of year
full suspension overhall
Fair bit of work has went into the wee tin can Andy
That mean we are finally gonna see u drift it at the Ingleston day in march?
Member no. 31 Project Purplyness
CA19.5DET 390BHP
dont think i am going to make it
i need to tax
mot
and insure the car
so I have no realistic way of getting the car through
although i would love to be there practicing, i will however be there spectating and hopefully getting a shot of danny's S14 just to see what all this stuff about 200SX's being good for drifting
trailer...... then u dont need ins mot or tax
btw something i always do when starting a major project is get the car mot'd first, so u dont have to worry about it when u go to put her back on the road with brakes that havent been used in ages etc etc
Member no. 31 Project Purplyness
CA19.5DET 390BHP