Originally Posted by
roy
Hy, First lat my apologizes for my bad Engels.
I'm right now working at a SR20DET swap in to a LHD S13 (CA18DET engine). I have a RHD S14A SR20 engine and loom.
I'm attempt to use this fantastic guide to do the wiring. Connector F8 and F10 are good all the colors are the same as in the guide.
Connector F10 I have a problem. Pin 1(Neutral) is fine. Pin 5(Fuelpomp) is fine. Bud at pin 8(ignition) The guide says the wire is brown bud my wire is purple! What can i do? (Additional info: The guide says that at connector F10 there are 3 times no pins present. Bud at my F10 connector all the pins have wires and number 7 is brown.?
Connector F4 ( of the S14A loom) I have all sow a problem. Pins numbers 32/31/40/30/29/22 are oke and the same color as the guide says. Bud nou I'm still looking for pin 48 and 35. The are not present on my f4 connector. The holes are empty. Wat kan i do? Att pin 41 is a brown wire... Can i yous it? And at pin 43 there is a WHITE/BLACK ( not black/white as the guide says) Is it the ride wire?
I hope shom body can help my out.
Greedz,
Roy, Netherlands.