I found some new wheels but not quite sure if they fit in the fronts.
Now I have 8,5J wide with offset 35 in the front. The wheels I want are 9J wide and have offset 40.
Anyone ever tried it?
I found some new wheels but not quite sure if they fit in the fronts.
Now I have 8,5J wide with offset 35 in the front. The wheels I want are 9J wide and have offset 40.
Anyone ever tried it?
there was a thread this week with a massive list of different wheel sizes and what had to be done to fit them do a search
ok will do
Can't find the thread
theres this one about http://www.sxoc.co.uk/vbb/showthread.php?t=201579
i'll try to find the other one
Its in the useful threads section :
http://www.sxoc.com/vbb/showthread.p...threadid=43684
there ya go im goin blind
Thans guys! This is what I needed!
9J is quite wide for the frontOriginally Posted by HKS power
et30 (like the R33 GTR rims) is just about perfect, higher et figure may cause problems with your suspension, but it depends on the diameter
9x16 et40 wouldn't fit
9x17 et40 I doubt it
9x18 et40 could be OK
You can use a spacer if the wheel hits the suspension
Thanx mono phil
Whats your suspension
Struts and springs or coilover?
What diameter rim? 17, 18, 19......
suspensio now only APEX lowering springs, wheels are in 18"
I think they might go straight on if you're running something like a 235 or 225/40 at the most you'll need a small spacer, say 5mm
Im running 9j 17'' with a -24 offset but had to use 6 mm spacers also as caliper was brushing the spokes. seems fine though.
Roller skate?Originally Posted by goon1001
9x18 et35 did not fit on the front of mine with apex coilovers. it hit the strut.
Not really surprisingOriginally Posted by andy14a
you'd need a 5-10mm spacer
Do you have a pic of those wheels they sound lovely. Or did you mean +24 offset?Originally Posted by goon1001
I found this on the net
im thinking +24 actually, but cannot remember! was too hasty using the quick reply ! need to get some decent pics of the car and wheels soon really, and will post one up.
have found the ebay seller i got them from, i have 17'' with +24 offset, looks like he is doing them in 18'' now with +12 et! linky:http://cgi.ebay.com/ebaymotors/18-in...temZ8044168744
just lookingn through the other wheels he sells and can confirm i meant +24! still bit concerned that when i lower it im going to have rubbing issues.
Last edited by goon1001; 11-03-2006 at 09:04.