Results 1 to 5 of 5

Thread: Does s15 sr20det have spigot bearing in back of crank?

  1. #1
    Guest Jim_Auto's Avatar
    Join Date
    Aug 2008
    Location
    Cranbrook, Kent
    Posts
    372
    Rides
    0

    Does s15 sr20det have spigot bearing in back of crank?

    Bought an s15 sr20det to replace the broken one in my s14. Went to fit the clutch and noticed there is no spigot bush / bearing in the back of the crank for the gearbox shaft to locate in. Yet i was told the engine came from a manual car and there is clutch dust on the block?

    So should it have one?

  2. #2
    I <3 BBS LM Actual_Ben_Taylor's Avatar
    Join Date
    May 2001
    Location
    South East
    Posts
    23,662
    Rides
    0
    No, on the S15 the spigot bearing lives in the flywheel.

  3. #3
    Guest Jim_Auto's Avatar
    Join Date
    Aug 2008
    Location
    Cranbrook, Kent
    Posts
    372
    Rides
    0
    So if im fitting my s14 box on the back with the s14 clutch and flywheel then i need to fit the bush? And will a s14 or s14a one work?

  4. #4
    I <3 BBS LM Actual_Ben_Taylor's Avatar
    Join Date
    May 2001
    Location
    South East
    Posts
    23,662
    Rides
    0
    Yeah, you need to fit one from an S14/A

  5. #5
    Guest Jim_Auto's Avatar
    Join Date
    Aug 2008
    Location
    Cranbrook, Kent
    Posts
    372
    Rides
    0
    Cool, thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •