How much camber I have to set? I have KYB AGX, H&R -3 spring, 205/55 R16 whells...
I think that -1° or maximum -1.5°, 'cause I don't want to have abnormal use of my whells
Tnx for help
Diego
How much camber I have to set? I have KYB AGX, H&R -3 spring, 205/55 R16 whells...
I think that -1° or maximum -1.5°, 'cause I don't want to have abnormal use of my whells
Tnx for help
Diego
nobady can help me?
You could measure it yourself by parking in a level surface, with a simple bit of trigonometry or even, a protractor!
(or a camber gauge).
Are you asking for recommended settings?
Do you have adjustable top mounts (front) and camber arms (rear)?
yes, i'm asking or optimal setting!
I have Cusco camber plate in the front suspension and I have to set them!
Search under my name (*AB*) or wheel alignment. There is quite a lot of stuff on here and also a link to the whiteline site for their recommended settings.
i'm reading and 1.5-2 in the front they say is ok!Originally Posted by *AB*
can i customize rear camber with stock suspension?
tnx
nice question!Originally Posted by FarkasGT
i'm interesting too
I don't think so, that's the reason why you need rear camber arm...
ok tnx, so i'll set my front camber at -1.5°
There is some adjustment as standard, but very small amount. It may be anough for what you need and it may notOriginally Posted by FarkasGT
I would recommend for front camber, -1 for street use, and -1.5 if you like to have fun on the twisties. For the rear, the camber adjustment is almost useless, as mine is on -2 deg, and thats as low as I can go, and -2 is too much! So yeah I need camber arms... For the rear, -1deg is about right!