Page 1 of 11 123 ... LastLast
Results 1 to 20 of 201

Thread: EMS Developments

  1. #1
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0

    EMS Developments

    Hey people
    This is my new sticky.
    We offer full workshop facilities, repairs, servicing, upgrades & body work repairs.

    CA & SR engine, gearbox & diff rebuilds
    large selection of used S13/14 parts
    large selection of stainless steel parts eg manifolds, exhausts, strut braces and ally intercoolers in development.
    Custom and one off work taken on.
    Please be aware of two month advanced booking due to work loads
    New workshop address
    Unit 1 Orwell St, Grimsby, DN31 3HB
    Workshop Number 01472 242320 08.30 - 18.00 or later usually
    Mobile 07863 265965 after hours

    Please see our new website (please refresh regularly as its being updated all the time)
    www.ems-develpments.com


    Steve@EMS Develpments
    Last edited by Steve@EMS; 03-07-2005 at 18:49.

  2. #2
    Guest SM's Avatar
    Join Date
    Nov 2003
    Location
    Todmorden & Apex.
    Posts
    34,447
    Rides
    0
    Excellent, another OFFICIAL SXOC Trader :thumbs

    Top work :

    Another Smiling Trader

    Might be moving back to Wakefeild too, so I'll be right in the middle of you and Bren.
    Bankrupcy here we come
    Flow bench news sounded good.

  3. #3
    Member alanjuggler's Avatar
    Join Date
    Feb 2004
    Location
    manchester
    Posts
    9,970
    Rides
    0
    aha! now i can harass you in here instead of waiting for you to skulk on msn

    just kidding about that part.. glad you're part of the sxoc traders now..
    white '94 s13 200sx scrapped - mapped to 1.45bar. OS giken box, garrett GT2876R, 950cc injectors, ORC twin plate, nistune. 349bhp/325lbft @ 1.3bar CA18DET
    white '96 s13 180sx - type g with more kouki bits - RB25DET, GTR steel twin turbo conversion, RB26 crank & rods. 2.6L VVT twin turbo, SR20 OSG box, OSG STR twin plate clutch, Z32 ECU w/ nistune.

    current status: 180 a bit broken but to be repaired.

  4. #4
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0
    Looking into the smaller Varta batteries for the Greddy IC the Varta Asia that ive seen fitted is only a 40AH battery so may not be up to the job,but il sling one on our test S14a and see how it goes.

  5. #5
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0
    Pre facelift S13 breaking, Most things available.

    Mint tailgate in "jizz white" £100 Poss deliver or £180 despoilered and painted colour you like

    Pre facelift front / rear bumpers same white £30 plus postage or collect or can be painted any colour PM me

    Facelift front bumper in red with lamps £50 plus postage

    Loads of bits for pre and facelift models also some S14a parts
    Last edited by Steve@EMS; 20-01-2005 at 14:25.

  6. #6
    Guest
    Join Date
    Aug 2003
    Location
    Uk
    Posts
    9,274
    Rides
    0
    what colour is it?

  7. #7
    Member alanjuggler's Avatar
    Join Date
    Feb 2004
    Location
    manchester
    Posts
    9,970
    Rides
    0
    steve, would you happen to have a white rear s13 bumper?

    (the facelift white, not jizz white )
    white '94 s13 200sx scrapped - mapped to 1.45bar. OS giken box, garrett GT2876R, 950cc injectors, ORC twin plate, nistune. 349bhp/325lbft @ 1.3bar CA18DET
    white '96 s13 180sx - type g with more kouki bits - RB25DET, GTR steel twin turbo conversion, RB26 crank & rods. 2.6L VVT twin turbo, SR20 OSG box, OSG STR twin plate clutch, Z32 ECU w/ nistune.

    current status: 180 a bit broken but to be repaired.

  8. #8
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0
    Quote Originally Posted by alanjuggler
    steve, would you happen to have a white rear s13 bumper?

    (the facelift white, not jizz white )
    I will have to check but i think i have a non "jizz white one" yes

  9. #9
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0

    S13 facelift for sale

    93 L plate in red. 12 months MOT tax negotiable.
    Mostly Nissan History oil and filter done every 4K
    Loads of bills etc
    Mint bodywork (aside from a bit of a scab on off side inner wing top)Tiny bit on the tailgate (may be done by the time its sold)
    mileage 83K
    Standard
    just replaced tubby
    Will post pics up if enough interest
    £2000

    * Just got scraped by a lorry so now has a nice 10mm deep scrape on the off side rear 1/4 panel
    Lucky i was there and got straight on the case with trusty camera phone, driver of lorry could do nothing but give me his details. so we will see what the insurance do about it now *
    Last edited by Steve@EMS; 24-01-2005 at 09:00. Reason: Now hit by lorry

  10. #10
    Guest crackdownuk's Avatar
    Join Date
    Aug 2002
    Location
    birmingham
    Posts
    3,976
    Rides
    0
    Quote Originally Posted by Steve@EMS
    Pre facelift S13 breaking, Most things available.

    Mint tailgate in "jizz white" £100 Poss deliver or £180 despoilered and painted colour you like

    Pre facelift front / rear bumpers same white £30 plus postage or collect or can be painted any colour PM me

    Facelift front bumper in red with lamps £50 plus postage

    Loads of bits for pre and facelift models also some S14a parts
    Jizz white

  11. #11
    Guest sx_DEVIL's Avatar
    Join Date
    Jun 2003
    Location
    Perth, Western Australia
    Posts
    511
    Rides
    0
    Hi mate...

    Just how deep do you delve into 'custom work' I know i'm in OZ but i dont trust anybody over here and no-one knows the CA. Oh and the really good guys that dont need to know anything about the engine are all fully booked for up and comming months!

    I'm after a CA18DET crank of CA20 spec stroke wise. And custom pistons/rods... but i guess you would need the block for that wouldn't you?


    EDIT: Or could i give you specs to work from?
    Last edited by sx_DEVIL; 01-02-2005 at 23:49.

  12. #12
    Guest squidmato's Avatar
    Join Date
    Apr 2003
    Location
    Newport, South Wales
    Posts
    775
    Rides
    0
    Hey mate, just wondering how much it is for the front and rear strut braces for an S13? Also is it possible to paint them black at some point? Cheers dude

  13. #13
    Guest
    Join Date
    Nov 2004
    Location
    Sintjohannesga Holland
    Posts
    1,075
    Rides
    0
    your pm-box is full steve...

  14. #14
    Guest
    Join Date
    Jan 2004
    Location
    Stockport
    Posts
    2,734
    Rides
    0
    Jizz White Tail gate - I'll have it

    Will call you to arrange it tmrw

  15. #15
    Guest G200's Avatar
    Join Date
    Jun 2004
    Location
    N. Ireland
    Posts
    438
    Rides
    0
    Hey Steve don't know if you remember me but i was in contact with you a while back about a white 200. Basiaclly i got rid of my old 200 and bought an MR2 but i'm looking to get back in the way of the S13 again. I'm looking a quote for this job here if you can.

    S13 200sx
    full engine rebuild with uprated pistons, rods and gasket
    and a respray, with, bootlid repaired (more than likely) in a normal dark blue (best looking cheap one).

    What would you estimate this job at and also if it were to go ahead would you be able to source an s13 shell and engine to recon.

    Any help would be great Steve.
    Cheers.
    Gareth.

    Ps you can pm me if you want.
    Thanks

  16. #16
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0
    You have PM G200

  17. #17
    Member
    Join Date
    Sep 2003
    Location
    UK . . . . . . . . . . . Power: .. ..... . 361bhp
    Posts
    4,359
    Rides
    0
    Quote Originally Posted by Steve@EMS
    Looking into the smaller Varta batteries for the Greddy IC the Varta Asia that ive seen fitted is only a 40AH battery so may not be up to the job,but il sling one on our test S14a and see how it goes.
    I've got a WestCo (usa) battery on mine with my GReddy I/C, you should have a look at them if you can. The place that sold me mine is very well respected here in Cheltenham and they said it is better than the standard battery so I bought it and it's V good. Snug fit too

  18. #18
    Guest G200's Avatar
    Join Date
    Jun 2004
    Location
    N. Ireland
    Posts
    438
    Rides
    0
    Steve sorry for being a nuisance just checking if your getting my pm's
    cheers
    Gareth

  19. #19
    Guest Steve@EMS's Avatar
    Join Date
    Mar 2004
    Location
    deceased
    Posts
    1,537
    Rides
    0
    Yes mate have got one, my PM box was full over the weekend
    Had a lot on etc.
    Theres big news afoot but i cant really say what it is yet till i have everything in place
    Anyway will pm you back very shortly.

  20. #20
    Guest G200's Avatar
    Join Date
    Jun 2004
    Location
    N. Ireland
    Posts
    438
    Rides
    0
    cheers mate!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •