Picture taken from original Nissan 200SX S13 brochure from 1991, here is link:
http://200sxs13.nismo.org/Brochures.html
Also check this, very great site of one 200SX S13 owner
http://200sxs13.nismo.org
Picture taken from original Nissan 200SX S13 brochure from 1991, here is link:
http://200sxs13.nismo.org/Brochures.html
Also check this, very great site of one 200SX S13 owner
http://200sxs13.nismo.org
nismo link doesn't seem to work...
The prototype is cool. But i prefer the S13 as it is today
I have some Sneak preview pics of the S14 @ home. I'll search them up and post them when i scan them in
Originally Posted by nismo joe
It works for me, maybee its some problem with cookies or so. Check you setting in control panels/internet options
Space-age . Looking on my driveway, it seems a bit like Nissan chickened outOriginally Posted by 935Baby
I can see where the (misguided) idea to fit those teardrop alloys came from.
They didnt put the 4x4 look on the prototype either
Originally Posted by 935Baby
nothing changed, but the link works now
If that's a dig at the standard suspension height, I went off the lowered idea after it took 2 scissor and 1 hydraulic jack to change a flat on an S13 with lowered springs (& dodgy sills) . Plus I don't have to fear speedbumpsOriginally Posted by pugwash
Not particularly at yours John, but just in general. With the 15's they come on the arch gap seems extra hugeOriginally Posted by John Bennett
Why didn't santa bring me a "One-Via" ??
Seems i need to help more old grannies across the street
U listening Santa ??
The production windscreen profile looks much better than the prototype, but the prototype wheel arches What were Nissan thinking when they fitted Terrano-stylee arches to the S13
EDIT: No rust attracting spoiler either
Can somebody ask real nice and get some of that content mirrored onto the sxoc site? Think the history page http://200sxs13.nismo.org/a_story_about_silvia.html is really good.
Oh my....
Forget structural rigidity, I'm taking my engine and catching the boat West
I'd be reluctant to let everyone see a standard S13 interior! Would look with S14 leather though
Originally Posted by John Bennett
1993 [L] RS13 200SX
2003 [53] MX-5 Angels
2004 [04] E63 645i
SXOC Member #199
they kept the rear 1/4 glass. not sure where the rest of the design went
Originally Posted by Pete C
Sure you could change the bumper if you really had to.
Best of all:
it's electronic, what with new dashboard buttons and all
Mind, that would be irritating when you hit it with your knee and sent the roof down in a downpour
that actually is fantastic.... you wouldnt turn the rear fogs on with the knee switch
I want one, do you recon you can get them on import?
It's Yankie cack hand drive, that's a replacement for the rear window heater switch. The "knee" operated fog light switch is still fitted but on the other side. I tend to hit the fog light with the key fob and the warning light hides behind the steering wheel.Originally Posted by stoofer
There was a convertible for Japan too but it's much rarer (400ish? or am I thinking of Sil-eighty) made by Autec. Had the fixed lamp Silvia front end.Originally Posted by MR SXY
For last year of S13 240SX in US and Canada all were convertible and have 155bhp KA24DE engine. Should be able to convert to turbo and RHD using UK parts - bulk head is supposed to have holes marked up for clutch and brake. But it will need a whole UK car to get the dash, loom and front subframe to get engine mounts right.
Of more note is the UK brochure says zinc/nickel plated both sides durasteel exterior panels. P7 Wings yes, doors yes, bonnet yes, rear quarter maybe, tailgate maybe but not the sills. The plating protects the panel but it rots from every cut edge. If you ever get new panels paint the rolled over edges and cutouts inside and out before putting it on.
and
Variable ratio power assisted steering!!!??? P11
and
variable wipers 'speed regulated' - the faster you go the harder they cling to the windscreen. P7. NOT on any UK ones I know of, only on German ones. Do we all have gounds under the trade descriptions act to get them fitted at this late date?