Page 12 of 12 FirstFirst ... 2101112
Results 221 to 236 of 236

Thread: Library of s14/a power figures

  1. #221
    Guest WTFIA's Avatar
    Join Date
    Apr 2011
    Location
    South Wales
    Posts
    795
    Rides
    0
    Car
    S14 1996

    Engine
    Standard pistons and rods
    ACL bearings
    ARP bolts throughout
    Cometic head gasket
    Big wing baffled sump
    Apex FMIC Type 1
    Apex Rad
    Z32 AFM
    Owen Developements GT2868R with custom HTA wheel
    Head ported and polished
    HKS cams and Vernier Pulleys set up for response
    Titanium inlet valves
    Sodium filled exhaust valves
    JUN Rocker arms
    DW rocker arm stoppers
    NGK BKR8 spark plugs
    Apex uprated coil packs
    Nismo 740cc injectors
    Apexi power FC ECU
    Rare HKS original Race filter
    Tomie fuel pres reg

    Tuned by Greg at Protuner


  2. #222
    Guest Navi's Avatar
    Join Date
    May 2006
    Location
    Slough, Berks
    Posts
    505
    Rides
    0
    1999 S14a

    230bhp/228 lb/ft.
    A bit disappointing but without a FMIC and adjustable boost, I'm not really able to capitalise fully on all the mods I've done.
    So the next step is boost controller, FMIC, and bigger injectors...hoping for the 400bhp mark.

    Current Mods include -
    86.5mm CP pistons
    ACL race shells/bearings
    lightened flywheel
    rebuilt head with port and polish
    rebuilt stock turbo
    Apex uprated WMIC
    Blitz Air filter
    Japspeed s/s manifold
    s/s elbow with decat and full exhaust
    Nistune
    Denso IK24 spark plugs

  3. #223
    Guest
    Join Date
    Jul 2005
    Location
    Netherlands
    Posts
    241
    Rides
    0
    400 with stock turbo?... Thats a bit optimistic I'm afraid

  4. #224
    Guest
    Join Date
    Oct 2004
    Location
    Sweden
    Posts
    758
    Rides
    0
    1995 S14

    Nistune
    Nismo 555cc
    Z32 AFM
    Forged Sr20det VVT
    Tomei Poncams
    GT2860R 0.82 (gt28rs 0.82)



    Tuned by Robert at Dynotech.se

    323whp @ 1bar measured on a dynapack
    Will show the graph when I scan it.
    Last edited by Shirunai; 29-04-2012 at 18:58.

  5. #225
    Guest
    Join Date
    May 2012
    Location
    kent
    Posts
    1,452
    Rides
    0
    108k s14a
    k&n panel filter
    full 3 inch decat system
    walbro pump
    stock ecu at 0.8 bar

    218hp @ wheels
    215lb-ft @ wheels

    now has:
    118k
    High mount intercooler
    ngk 7 plugs
    apexi cone filter
    H-dev 1a chip
    Hks actuator at 1.1 bar

    will have s15 injectors and custom map in couple weeks

  6. #226
    Guest
    Join Date
    Aug 2012
    Location
    pontypridd
    Posts
    446
    Rides
    0
    was up pod on the weekend just update my 1/4 mile 13.4

  7. #227
    Guest
    Join Date
    Oct 2012
    Location
    denmark
    Posts
    5
    Rides
    0
    silvia ps13 sr20det redtop

    Wossner pistons
    apex h-beam
    acl racer bearings
    HKS 2,0mm stål headgasket
    Blitz olie cooler kit
    Olie Filter Relocation Block
    apex headbolts
    apex plenum
    Apexi filter kit
    Apex 260 / 260 cams
    555cc
    Z32 AFM
    Kazama Oil Catch Tank
    50mm Tial bov
    Garrett GT2871R (460 HK)
    HKS turbo manifold
    HKS Actuator
    Aftermarket Turbo Outlet (Wastegaitor Type)
    GP Sports Downpipe (No Cat Type)
    Yashio Factory udstødnings System 3"
    Japsspeed 55mm alu radiator
    Final Konnexion FMIC
    Remapped engien managment
    Splitfitre coils

    GTR fuel pump
    Engine Earthing Kit
    Road Engine Damper
    Nismo Engine Mounts
    Nismo Coppermix cluts Kit
    Nismo Mission Mounts
    Nismo Clutch Bracket
    ORC Clutch Line
    stock trottelboby


    430hp @ 1,35bar
    500nm

    are running whit 1,65bar now :-D

    steve from fctuning will install nistune and map it next year, when the head have been machined, bigger velves, bc race cams 272degrees 12,55mm lift, 80mm trottelboby, DEATSCHWERKS 810cc injecktors and 265lph fuel pump, and a precision turbo ;-)

    have the precision 5557, top mount manifold, 80mm tb, 810cc injecktors and a 265lph fuel pump, and are waiting for the rest.
    Last edited by bonn; 08-12-2012 at 22:08.

  8. #228
    Guest
    Join Date
    Nov 2012
    Location
    Fochabers
    Posts
    507
    Rides
    0

    S14 gtr

    S14 rb26

    Tomei rods and bolts
    New rb26 balanced crank with nismo big ends
    Hks cams
    Os giken piston
    Standard afms
    550cc injectors
    Gt2860 hybrids

    527 hp at fly
    394 ftlb

    I feel as if my torque is far to low by looking at some other graphs on here


  9. #229
    Guest Richie200sx's Avatar
    Join Date
    Jun 2009
    Location
    Birmingham
    Posts
    2,122
    Rides
    0
    SR20DET
    CP forged pistons 86.5mm
    Tomei Adjustable cam gears
    Manley H-Beam connecting rods
    GT2871 0.64A/R
    Tomei Poncams
    RAS kit
    HKS Springs and retainers
    HKS Actuator
    Cosworth 1.1 Headgasket
    Apex braided turbo lines
    H-Dev manifold
    Apex turbo elbow
    Nismo 740cc's
    Kazama catch tank
    ARP Engine and Head Bolts
    Apexi AVCR

    Mapped on Nistune. 418bhp and 428lb/ft at 1.5 bar


  10. #230
    Guest Sean-B's Avatar
    Join Date
    Sep 2010
    Location
    West Midlands
    Posts
    2,398
    Rides
    0
    S14a

    GT2871R 0.64
    Tomei expreme manifold
    Tomei expreme elbow
    Tomei poncams
    Greddy FMIC
    A'pexi PFC
    Blitz nur spec 3" exhaust



    380.5 bhp / 405lbft @ 1.35Bar

    Mapped by Greg Gush @ Protuner

  11. #231
    Now with 400bhp....
    Join Date
    Aug 2007
    Location
    South west
    Posts
    35,838
    Rides
    1
    1998 s14a ~95k

    Sr20det
    Gt2871r .64
    Tomei 260 procams
    Tomei ras kit
    Bc valve springs/retainers
    Reground valve seats
    Uprated exhaust valve guides
    Cosworth 1.5 mhg
    Arp head studs
    Nismo 740cc injectors
    Oem bottom end

    402.5 bhp
    390 lb ft torque

    345 bhp at the wheels.

    Mapped by jez @ h-dev





    whp
    South west Events and local meet info. See here


    My car on THRLL: http://thrll.com/car/1998-nissan-200sx-12410
    Chris Cooke Photograpy: https://www.facebook.com/ChrisCookePhotography
    1998 Nissan 200sx s14a , 2000 std 5 speed with nismo supercoppermix clutch bn6 Sapphire Blue

  12. #232
    Guest
    Join Date
    May 2009
    Location
    Romania
    Posts
    25
    Rides
    0
    S14 SR20DET 1995 ~175.000 km

    - Tomei 740cc side feed injectors
    - FMIC
    - Apexi' air filter
    - Standalone ViPec plugin
    - car now runs on MAP

    Results: 276ps\417nm

  13. #233
    Guest
    Join Date
    Sep 2009
    Location
    Loughborough
    Posts
    220
    Rides
    0
    Car
    1996 S14A SR20DET
    Car 90k, Engine 4k miles

    Intake & Exhaust:

    Apexi Induction Kit
    Apex Front Mount Intercooler
    Apex High Flow Plenum
    H-Dev Exhaust Manifold
    3 inch Down Pipe
    3 inch Silenced Decat
    3 inch custom catback with silencer

    Engine:

    Garret 0.64 GT2871R with Upgraded Actuator
    Tomei Poncams Inlet & Exhaust Set – Duration 256/lift 11.50mm lift
    Power FC D-Jetro – Mapped by Jaz @ Horsham Development
    Wiseco Piston Set
    Eagle Conrods
    ACL Big End Bearing
    ACL Main Bearing
    ARP Head Stud & Nut Kit
    WL Rocker Arm Stoppers
    Cometic Head Gasket 1.6
    Apex Hydraulic Lifter

    Boost:
    1.3 Bar

    Results:
    425.7 Hp @ 6500 (Fly)
    370.1 Hp @ 6500 (Wheel)

    361.7 ft.lbs @ 4250 (Fly)
    328.8 ft.lbs @ 4250 (Wheel)

    Recorded at Futrue Motorsport


    GRAPH

  14. #234
    Guest
    Join Date
    Feb 2009
    Location
    Finland
    Posts
    1,981
    Rides
    0
    Had another run today. The main difference is that I don't have VVT anymore. I have adjustable sprocket set to 0.
    Boost was a bit higher than on the last run aswell.






    Quote Originally Posted by bahis View Post
    Car didn't work properly, but here is the graph anyway.
    435HP at the fly
    411HP at the wheels
    Boost 1.4Bar

    Specs:

    Engine:
    - CP forged pistons
    - Eagle forged rods
    - ACL Race rod bearings
    - ACL Race main bearings
    - Apex'i headgasket 1.5mm
    - ARP head studs
    - Brian Crower cams 264deg/12mm
    - Brian Crower valve springs
    - Brian Crower titanium valve retainers
    - Tomei RAS kit
    - Bigger capasity sump ("Freddy")
    - Garrett GT3071rwg .86 a/r "modified"
    - SSQV BOV (recirc)
    - Z32 MAF

    Ignition:
    - VAG coilpacks
    - Denso iridium plugs (2 grades colder)

    Powertrain:
    - Apex short shifter
    - Carbonetic blade clutch

    Cooling:
    - FMIC
    - 19-row thermostatic oil cooler
    - Apex alloy rad
    - Apex twin electric fans with shroud

    Fueling:
    - Walbro fuel pump
    - Z32 fuel filter
    - 700cc (800cc) injectors
    - Tomei FPR Type L


    Exhaust:
    - H-Dev tubular manifold (satin black ceramic coated)
    - Apex Sensible catback
    - Apex turbo elbow
    - Apex flexi downpipe





  15. #235
    Guest joetheeskimo's Avatar
    Join Date
    Jul 2012
    Location
    bournemouth
    Posts
    579
    Rides
    0
    S14a

    Standard turbo
    Hdi boost controller
    Apexi air filter
    Apexi cat back
    Nismo 555 injecors
    Walbro fuel pump
    Ebay fmic
    Pigeon mod
    Horsham custom map



    Last edited by joetheeskimo; 17-08-2013 at 10:41.

  16. #236
    Guest
    Join Date
    Nov 2010
    Location
    Wrexham, North Wales
    Posts
    1,905
    Rides
    0
    Nissan 200sx S14A SR20DET 58,000 Miles

    Garrett GTX2867 0.64A/R
    HKS Actuator
    braided turbo lines
    H-Dev manifold
    Apex turbo elbow
    Apexi GT Cat back Exhaust
    3 inch Downpipe
    3 inch de-cat pipe
    Apexi Induction Kit
    Front mount intercooler Kit
    Five O Motorsport 850cc Injectors
    Apexi AVCR
    ACT 6 puck Race CLUTCH
    ACT Prolite Flywheel
    Walbro fuel pump

    Mapped on Nistune by Greg ay Protuner

    384bhp and 375lb/ft at 1.3 bar


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •