After more research/ digging around it’s the ECU that’s not getting power as I’m not getting a check engine light on the dash, swapped the relays over for it and still nothing. Any advice?
Sent...
Type: Posts; User: baileypoole_
After more research/ digging around it’s the ECU that’s not getting power as I’m not getting a check engine light on the dash, swapped the relays over for it and still nothing. Any advice?
Sent...
On the ecu? I’m using a euro ecu and ecu harness
Sent from my iPhone using Tapatalk
Yeah both from the turbo car
Sent from my iPhone using Tapatalk
Yeah fuse it all good and relay works once it gets power
Sent from my iPhone using Tapatalk
Hi there
I have swapped my sr20det from a 97 auto s14a into a 97 jdm s14 which had a sr20de.
I used the main engine harness from the original DET car, plugged everything together and there’s no...
After some advice on whether the metal fittings (pictured) that go from the valve cover to a breather hose can be removed or not.
If they can what’s the best method on doing so?
Thanks
...
So I started my car up last night, all was fine, then drove to a petrol station, turned my car off to put fuel in, then went to start it and it lost all power everywhere like it shorted out.
...
Want to cut and fit a sheet of MDF to fit across the inside of the boot (so it sits level above the wheel well) but I haven’t got the car with me currently, does anyone done this before and know the...
^^this
Sent from my iPhone using Tapatalk
Battery was the first thing I checked, it’s a fairly new one and it didn’t drop any voltage, also still cranks the engine with no struggle. Going to check the loom as that’s the only thing I haven’t...
Have been there before, had a new loom and running 17”s so it don’t happen again, all seems fine there though
Sent from my iPhone using Tapatalk
Seems like I always get the fun issues that no one else gets. My car will running fine then when I put the full beams on it cuts power to engine, by the sounds of it, it cuts the fuel pump? I’ve...
Yeah, when the lights on it drops no lower than 12v and when it’s off it’s 14v
Sent from my iPhone using Tapatalk
So my battery light flickers on and off, but if i move my steering wheel or come off throttle when moving it seems to stay off. When the light is on, it struggles to idle and you can hear the fuel...
I have an apex intercooler kit that’s just sitting away doing nothing, not sure what type it is but the battery tray didn’t need cutting to fit, pm me if you’re interested in buying it
Sent from...
When I bought my car (s14a) it had a manual swap done from a previous owner and he didn't re wire the reverse lights. I looked online already and from what I can see (half of the photos on the forums...
Mine does the same although it only flickers when I touch the throttle, I've heard it's the connections/dry solder in the cluster
Sent from my iPhone using Tapatalk
Ah I see I will give that a go and hopefully it should solve the issue, cheers mate.
Sent from my iPhone using Tapatalk
This my second breather, the first one was on before I had the car but the second one has only lasted just over a month before splitting
Sent from my iPhone using Tapatalk
So you're saying replace the breather with a hose to the inlet pipe?
Sent from my iPhone using Tapatalk
When I recently bought my 200 it came with a catch can + pcv delete and it keeps popping the breather filter. Is this due to being installed wrong?...
All fuses are good but I never knew constant needed 12v [emoji849][emoji379] mine isn't giving 12v, more like 7v. At least I know what to look into now, cheers fella.
Sent from my iPhone using...
Yeah and i moved the ground to the tunnel and it's earthing properly now, the end of the harness is getting 12v but it still isn't turning on. I know it isn't the actual stereo either as I've tried...
Funnily enough I did that after finding out it wasn't grounding properly, still nothing even though I tried using a different harness and head unit. One thing I did find out was the constant is...
I've tried running test grounds straight to the metal bracket where the stereo bolts into, still nothing [emoji20]
Sent from my iPhone using Tapatalk