Pm Me what your after mate !
Tommy
Type: Posts; User: turbo t
Pm Me what your after mate !
Tommy
steven yhpm
hey guys looking to get another 200
my bm is on ebay and just sold another car
so
looking for s13 or rough 14 in scotland pref local edin/glasgow hence i this section lol
could also be solvent pop with using far too much paint
tommy
sorry just read its water based
sand as per base clear instructions
the only thing if not doing in a booth allow extra dry time between coats...use the gun blowing just air or a hair dryer...
a rotary is no good for prep work what so ever exept for 36 or 80 grit for stripping paint to the metal
use the da
i all depends on the colour
finish all repairs using 240 then buy some...
hey buddy i know a guy who will do this fairly cheap for you !!
give me a call if you still need it done
number in pm
tommy
mods please leave for a day or 2 please just to offer the locals first THANKS
the car
the car has 5 months tax and 11 months mot v5 is pressent
engine
1.5 16v non vtec with around...
the finish is in the money imo
get a small 50-100l compressor and a trap
smal reg were it goes on to gun
the biggest thing is a gun to run off so little cfm
i would say a devilbiss...
sozzy mate im not i dont have a car any more got a company van
there there who ever wants to collect them
t
Sorry guys forgot all about this post
still here
pm please
please admin leave for the local guys to get a chance
i have 5 std alloys from a s14
4 with good tread
1 ok for a spare/drift
thought the locals should have first dibs
hey guys coming back from the drk side looking for a s13 etc needing work etc will travel
thanks
t
www.beaveranels.co.uk
upol also do a satin black trim spray if you want to go down the spray can route even gives a good spray fan !!
you can buy 2k satin mix with hardner and spray
or apply black base coat then ad flttening agent to your clear coat spary away
tommy
DOG hows it going mate ???
is this still avail
could do with an engine for my mk1 caddy:eek:
tommy
yip no key
was the filler wet sanded was it outside in the rain when it was filled etc ?
basicly strip it right back go do the repair again use 2k primer 1ltr tin mix correct
leave over...
and the black on the 14s are straight black so you could get away with 2k straight gloss >
just were a mask when doing so on both applications
or run it down to me and il fix it my...
most are painted in base and clear
so if you have a compressor go to the paint shop and buy some base coat and clear coat fix the repair use propper 2k primer job should be good
...
never realy painted with celly.... bit before my time :D ....but it sounds to me a thing called solvent trap or blooming
try some g3 polish with a buff and it should come back to gloss
me...
usually its on the first coat it will happen ....
lots of people put the paint on heavy just to se tho colour straight away
its not the way to do it !!
3 med coats will cover the same and leave...
sounds :eek::eek: good lol
just actualy looked at your post the slver metallic i called a stripe !
ok to blend do your repair
prime repair 3 coats first 1 just the repair 2nd just wider than your first 3rd wider than your second- you shoud not ave a solid edge
allow pref over night to...