http://www.summerhillspares.ie/
Type: Posts; User: JDM Boy
http://www.summerhillspares.ie/
This was the way I got it back from the tuner so I presumed it was ok.I will have a look at the MAF part number next time im at the car
Anyway I think I will get some injectors and z32,but if I got...
The highest on injector duty i've seen is 90%.
So really it needs to go back on the rolling road if I fit a z32
dang it....is it a bad idea to leave it as is?
Its an sr20det blacktop 180sx
induction kit,gtr fuel pump,444cc injectors(not sure on the injectors,they look standard),colder plugs,exhaust from elbow back,power fc.
Standard turbo (t25g),front...
On my power FC when I floor it Im getting a reading of 5.115mv
I take it shouldn't go over 5mv? The engine warning light flashes but the rest of the readings seem within spec.
Hi
Im looking for new pads & discs for 1997 180sx (sr20det)
I had a look at your site but im confused as to which are the right brakes for the 180sx?
Thanks.
The clutch fingers will have a wear mark where the bearing presses against them
It sounds like the bearing is worn out.Take it in your hand and spin it while putting pressure on with your hand,it...
Could be alternator,water pump.....or power steering
Take a long screwdriver,put the handle end to your ear and the other end to each of these and listen for the noise,it will be obvious then where...
15v is too high,it should be more in the region of 13.8 - 14.4v
Did you measure it at idle or with the revs up and accessories switched on?
I think the blacktop engines come with the 54C pistons which are stronger than whats in the redtops.
Oh...thought they did pads as well....thanks
I need some new pads and discs
I want some performance ones but don't want to break the bank either
Are the above any good?
Also don't want masses of dust
I think the blue tint im seeing is coming from the blue bulbs :wack:
I think the glass is clear other wise.
What do you reckon on these lights with H.I.D's?
Hard to know what the quality/fitment would be like...
...
Good man thanks
I didn't notice that....I knew it was too good to be true :mad:
Thanks fellas,I've been looking for pics of these fitted but can't find any!?
Looking for one if anybody has one or knows of where I can get one,thank you please.
Anyone know where I can buy these?
Looking for the ones with the blue tint
Lift the handbrake (not to suddenly) while driving,i you still feel it,its probably rear brakes.
If there is a shimmy in the steeringalso when you brake it will be the front end.
You need to...
Micro Hydraulics
http://www.microindustries.ie/index.html
I had a braided turbo hose made here before,they do all types of hoses and fittings etc,used to be just off the longmile road not far...
'shiny' pads won't cause brake shudder,rub them on some sandpaper and they will be grand,don't replace them if theres plenty of meat left on them.
Could be the disks.........but could also be worn...
Whats an NCT?
New or second hand?
If you order from camskill before 12 midday you will have them next day