Search:

They do have a better range out now than when i got mine so you have loads of choice

Ever since I started looking into what turbo to choose I knew it was overkill. I quickly set out on what I thought would be a not too difficult job, and fortunately/unfortunately I dont give up easy....

Immy, red line is blitz nur spec rx? (The quiet one) plus a sports cat. He had run at 426hp earlier that day with that setup, but then the downpipe cracked and actually snapped off?!?! so the tuner...

http://tapatalk.imageshack.com/v2/15/03/17/91bcb3196eb34465fa84d5957ab1066c.jpg
With and without restrictive (quiet) exhaust amd sports cat. 1.5bar
Gtx2867r is class!

Yeh, it should have a much bigger but I want it for the road, and the noise really. Has alot of things in place for bigger power but not just yet

Sent from my SM-T315 using Tapatalk

82474Excellent work. I have another graph, albeit on a non fully tuned VE at 1 bar, .64 A/R

Could provoke some discussion but not the best comparison with boost pressure so different! At the fly...

Hi. I need a longer throttle cable for my Silvia. I'm doing a VE head swap and my Mazworx intake mani moves the throttle body about 10cm fwd from from the original position.

Any ideas? LHD...

SR20VET incoming. Been a long long time, 12 months off the road :'(
Japfest track action anyone?

Sent from my SM-T315 using Tapatalk

Double post

No chance of modifying a DET one. I went for a 20V CAS but tbh unless you are retaining factory ECU b70its dont bother, go for the hall sensor!
The 20V CAS is right up against the firewall, and...

S15 OMG

At least everyone understands half of it. Most think 'Sis(ter) OMG' the chosen read 'S15 OMG'

Oh, and you are going to have 4 stud hubs, but need 5 stud ones, so throw the baby out with the bath water and get Skyline hubs and brakes all round (BMC too), then get another set of suspension arms...

Dont be too quick to pull out what you have in the car already if it works perfectly well. Made that mistake myself!
I also agree that a DE+T isn't going to be as good as a full DET

I'd get hold...

Any particular reason why?

(I know it's not an 'S')
But
Datsun 240z

Talk to conceptua, they do solid copper ones. I don't think they advertise that routinely though. They do block/mani, mani/turbo and turbo/elbow. (I have them all so actually know they exist)
...

Get another SR20DET and a VE head ;) then you get alot more potential but the same weight in the same place.

But I would say that as it is what I am trying to achieve. That is amazing work by the...

Cool, that is really helpful!
At least I can't get the amount of links between each cam sprocket wrong! It may well be exactly in the correct place, I just have to make sure the cams are rotated to...

I'm after the same answer to question 2:
2. Any way to check if the crank skipped a tooth without pulling the engine or head?

Hi. When I reinstalled my head I let the chain slip down the front cover. Because i did this I fear I could have let the chain skip a link down on the crankshaft sprocket. Is there a way to tell with...

If you need a spare flywheel and clutch i'd send the one that has just come off my car cheap. has loads of meat, obviously replaced at some point but unsure when

Could try Brentacre, they are into pretty bespoke stuff

From Nissan NEOVVL.com (use same injectors)

259 cc = 175 WHP - Red SR20DE
278 cc = 187 WHP
324 cc = 218 WHP
333 cc = 226 WHP - Grey SR20VE
370 cc = 250 WHP - Purple SR20DET
416 cc = 281 WHP...

Ahh, the internet on Aerodynamics.

This makes me very happy I have a VVL head in the making. Sounds so raw!

BMC stopper wont solve the problem btw, just make it sharper once it is done. I would recommend doing the leaving the pedal depressed with a length of wood for a night or two, with the BMC reservoir...