So i managed to get the car running after cleaning up the connector which goes to the alternator. I also had to run an overlay wire from the 12volt feed to the ignition switch to the permanent power...
Type: Posts; User: tonksie93
So i managed to get the car running after cleaning up the connector which goes to the alternator. I also had to run an overlay wire from the 12volt feed to the ignition switch to the permanent power...
I’m after a fair bit more power so i was thinking of a stroker kit and some work on the head. I was just wondering if a stroker kit could be fitted with minimal tools but if the engine needs to come...
I’m currently running 350bhp, should crack 400 as it is with a retune and turbo’s good for 550. I’m planning on fitting tomei 270/270 cams, brian crower springs and retainers, tomei solid lifters and...
Cheers guys, don’t really have the tools, equipment or space to take the engine out right now. Will just stick to a head build for the foreseeable.
Thinking about going with a brian crower 2.3 stroker kit in the near future and i’m just working out how long it would take to fit. I would be doing it on my drive so ideally would like to leave the...
Anyone know where i can find detailed wiring diagrams? I’ve got a short on the alternator charge cable and the power feed to the ignition switch but having looked inside the fuse box theres all sorts...
I’ve read about the arch fender loom causing electrical issues. Anyone had similar symptoms?
Think my power fc might be on its way out. Silly question but are the ones from negun brand new? And would it be the newer style with the black display with orange text?
...
I don’t have any HICAS fuses or relays in the engine bay fusebox but the car has defiantly had the HICAS deleted as i saw an old add for the car before i brought it. If i put 12volts to the cranking...
Basically the circuit direct from the battery which powers the ignition, alternator and HICAS module is only showing 2volts when the battery and the rest of the system is at a good 12volts. I’ve had...
Anyone have any solutions?
No the S13 front and rear belts have different buckles.
Anyone know where i can get a flexible seat belt buckle that will fit through one of the side holes in a fixed bucket seat to allow the waist part of the seatbelt to restrain me tightly? I have...
Cheers guys, gonna go with a helicoil and red loctite as i don’t have access to a welder. Should i insert the helicoil with loctite on the outer thread and allow it to dry before fitting the seat...
The front outer bolt hole for my seat has partially stripped, i’ve ran a tap down it but it’s still no good, the bolt threads in but if i try to tighten it it’s going to completely pull the threads....
Thanks guys, think i will be going for the GTX2867r then, should i go for the .86 turbine? Based on not having VVT means i probably won’t have good midrange anyway.
How would a GTX2867r or GTX2860r compare to a GT2871r .86 if i could get my hands on one? I would ideally like a compressor with a direct fit, it would save me from having to fabricate a new intake.
Trying to decide what turbo i should go for on my PS13. I am aiming for 400bhp and obviously would like as fast spool as possible. I was going to go for a GT2871r .86 but seeing as they have been...
Reset to the base map and turned off the boost control and it fired up thanks guys. Just letting it do the idle learn. If i refit my stock ECU until its ready to be mapped will i have to run the FC...
Just read how to reset the FC to the base map and to turn off boost control? Is there anything else to look out for if the engine still doesn’t fire? Hoping i haven’t got a faulty unit.
I’ve just brought a second hand Power FC for my S13 SR, should it start the car? It cranks but doesn’t fire, i haven’t adjusted my injector values so thinking maybe it isn’t getting enough fuel? Can...
Thanks for the link. My car has had an ABS delete but i can’t find any non abs hubs, will these still work? And do they press or bolt into the knuckles?
I have a PS13 which has been converted to 5 stud hubs, it also has Z32 front brakes and R33 rear brakes. I think my front passenger wheel bearing is on its way out. Does anyone know what car i would...
I just fitted a new elbow on my s13 sr. I used a s14 elbow with an s14 downpipe too, seemed to fit onto the cat flange with no problems.