I removed the shield part but left the inner section when I fitted the R34 brembo/disc upgrade on mine
Type: Posts; User: David_S14
I removed the shield part but left the inner section when I fitted the R34 brembo/disc upgrade on mine
Have a read of Replace heater control bulbs in the "Useful threads - read before asking a question" thread :)
Pretty easy to replace really, you can also replace the bulbs in the other switches...
Sold :( ah well it's gone to a good home and will be put back on the road :thumbs:
PM's replied to.
Thanks for the replies :sxoc:
I'm in Rugby, Warwickshire so pretty central.
Got a run around sorted to get me to and from work so not in a massive hurry to sell.
To top it all off broke two...
Anyone ?
The time has come for the 200 to go, I was looking at selling/trading it in in the summer but it's developed some problems so I'd be selling it as a spares/repair but I'm lost as to what it would be...
Could be the ECU temp sensor which puts the car on a different map when it's below a certain temp, if it's not reading right you will not get the map change hence bad cold running.
Have a read of...
Hate X-factor.
Wouldn't be as bad if he'd written the song but it's a cover FFS almost anyone can sing a cover if given the coaching and production etc that he's had.
It takes dedication, hard...
Did someone say Navan :confused::D
http://www.sxoc.com/vbb/attachment.php?attachmentid=23537&d=1129168481
Have a read of my post on http://www.sxoc.com/vbb/showthread.php?t=287584 for a step by step and what the flashes mean.
Try a reset first, have a look at my post on this thread.
It has LN1 on the VIN plate but "BLN1 Purplish Blue Pearl" on the Nissan touch up kit :)
The guide was here
There are the tracks on the card under the brown resin coating and then there is a oblong of solder that acts as a fusible link. This solder melts if the current draw from the...
Done :sxoc:
Just a quick thank you to Ollie and Cassie, just renewed with Sky for another year, very professional service as usual.
I posted this on the other Cryo thread:
You can treat ferrous cast materials as well which should improve the grain structure of the material, I did my R34 brake discs at work before I...
Welcome to the forum :wave:
Could be the turbo gasket (between the manifold and the turbo) do a search in Tech S14 for "tractor" and you'll get loads of posts/fixes for the same symptoms.
John...
Have a look at This thread for some info
Have you checked the alarm receiver wire as it's normally taped to the loom so in a bad position. Have a look in the ".....before you ask a question" post as I think there is a guide in there to...
IIRC It should be illuminated when the lights are on (like all the buttons on the row)
Paid :sxoc:
Main cat is after the downpipe.
The S14's only have one cat not two like the S14a so it should pass with just the main in place.
Well after wading through all the responses I tracked down a thread with the part number on for the Nismo's
The HKS's have the same model number moulded into the top (my serial numbers are...
I've got a set of unused HKS 555's that I'm thinking of selling which look exactly the same as the Nismo's.
Can anyone confirm that they are the same, I know they are both made by Unisia Jecs so I...