Search:

S14 SR20DET 1995 ~175.000 km

- Tomei 740cc side feed injectors
- FMIC
- Apexi' air filter
- Standalone ViPec plugin
- car now runs on MAP

Results: 276ps\417nm

Thanks for the answer "-Marc-"

Car: 200sx S14 Zenki

Yes, it's due to rust...it was repaired 2 years ago and it appeared again.

Hi,

Currently on the rear I have Rota Grid 18*10 +15 with 265*35 tyre.

What spacer will be needed if I mount a +50mm overfender? (fenders are flared now and I cannot measure the distance from...

Well finally found the problem...it was the piggy back Ecu Master Det 2

Reroute the wires to original config and the car started and worked normally ...back from a 60km drive

Thanks for all the...

I checked today the wiring of the cables and:

Wiring:
CAS harness connector -> terminal B and ground => battery voltage
CAS harness connector -> terminal A and ground => continuity exists...

After almost 2 weeks of waiting for the CAS...I recived it.

I mounted the CAS (second hand) on the car and the car started. Everything was running ok until it suddenly died ... (engine temo was...

Back from the car : CODE 11: CRANKSHAFT POSITION SENSOR CIRCUIT (0 STARTS AGO)

Tried to start the car today (cold engine) but without luck.

Tomorrow a friend will bring the diagnose cable to check for fault codes.

Didn't check the plugs for spark (I will do this in the...

Hi,

Problem: car doesn't start (engine is worm, I will check tomorrow morning to see if it starts when cold)

- a few days ago the car started to behave strange...after I accelerated (light or...

Hi,

I have a 95' S14 LHD without A/C (don't know if the car came with an A/C and was removed before I bought the car)

Is it possible to mount an A/C system that came from a RHD car in a LHD?
...

well in this case I will take it out and try to find the problem

thx

When I start the car I have around 12.* V on the battery and it seems the alternator is not charging it on IDLE.

If I just accelerate a little it will start to charge. When it's starting to...

You should also try at rhdjapan.com. The price was around 140 euro I think:)

+15 offset ,sorry forgot to mention

Hi guys, a small question. I want to order a set of HSD HR to fit on an S14 that currently has rota grid 18*10 all 4. Will the front suspenssion clear to rims?
Now my suspenssion is bilstein b6 and...

I have on the car BILSTEIN B6 with the progresive springs FK (-30mm). I bought the car with this suspenssion and drove it aprox 15000 km and there is no problem with them.
Maybe it's me but it...

Sorry, I was referring to the dimension of the tyre. I also have just purchased a set of rota grid 18*10 et15 and on the car I have a bilstein b6 suspension that will give me some problems depending...

What tires do you have on front wheels and the suspension is stock?
Nice car.

what rims are on the car?

Also you can try on rhdjapan, I've seen that model on exterior section for nissan s14

can you please tell me what wheels are on the s14 zenki posted earlier...?

I've seen this bumper on a Ford Probe here in Romania ....see link
http://www.4tuning.**/tuning-4/masini-tunate-din-romania-61/tuning-la-feminin-pink-ford-probe-by-ramona-4712.html

If the link...

I have a HKS SSQV and I have also back fire and flames . Regarding fuel smell and mpg I didan't noticed any differance, everything is the same.

I went there with a Ford Scorpio :D (good car), with my brother and my girlfriend.

I hope I will pay the tax this month to register the car :annoyed: so I can start the work on it ...:(