Search:

Type: Posts; User: skyshack

Page 1 of 20 1 2 3 4

Search: Search took 2.89 seconds.

  1. CA18DET ECU is to all intents a BBC model B,...

    CA18DET ECU is to all intents a BBC model B, running at 1MHz.

    It gives up on closed loop lambda operation at 3200 rpm as it can't do the calcs fast enough.

    The trick is it has a programmable...
  2. Last S13 for Europe was made in Dec 93. That's...

    Last S13 for Europe was made in Dec 93. That's before NCT high idle and lambda test date of 1 Jan 94 so you should get a Nissan dealer to give you letter stating date of manufacture.


    If all your...
  3. Replies
    1
    Views
    135

    "Services" not "systems"....

    "Services" not "systems".
    http://www.performancetuningservices.co.uk/
  4. I don't think so. It's on the injector / ignition...

    I don't think so. It's on the injector / ignition loom, I think that goes across the bulkhead and into the cabin under the wiper motor. page EL-104.
  5. Replies
    42
    Views
    961

    Bluetooth is very short range, most devices are...

    Bluetooth is very short range, most devices are class 2 range 10 meters and must be line sight with no walls.
  6. Thread: New car time

    by skyshack
    Replies
    198
    Views
    10,082

    Chav enough for Aston 2019...

    Chav enough for Aston 2019...
  7. Put a test lamp on it while running it should...

    Put a test lamp on it while running it should light up.
    https://live.staticflickr.com/65535/48011830682_2074f46a28_z.jpgIMG_5588.640JPG by Peter Hill, on Flickr

    If it doesn't light then try...
  8. Replies
    42
    Views
    961

    But for many people if they don't switch it off...

    But for many people if they don't switch it off the kids won't go to bed.
  9. As you see it move when applying power it's OK....

    As you see it move when applying power it's OK.
    Problem must be feed or ECU or loom between AAC and ECU.

    Test the system as page EF&EC-106 in the fsm.

    If you unplug the ECU, then with ign on...
  10. Replies
    42
    Views
    961

    How many other Wi-Fi networks can you see on your...

    How many other Wi-Fi networks can you see on your phone?

    This is how to check the sync speed of your router. Sync speed is how fast it's connected to wall socket and to the cabinet down the road....
  11. Replies
    238
    Views
    42,311

    Standard Nissan exhaust gasket is composite. ...

    Standard Nissan exhaust gasket is composite.

    MLM are reusable.
  12. Anti-X. I wanted to run a python script with...

    Anti-X.

    I wanted to run a python script with selenium on an old Athon 1800XP. Turned out that all browsers are compiled to use SSE2 and javascript engine in phantomjs is so out of date that it...
  13. Replies
    42
    Views
    961

    If its really the line then you need Zen, they...

    If its really the line then you need Zen, they will kick openreach for you until its right.

    But usually it's your end.

    Try a network cable to laptop/desktop.

    Some routers have diagnostics...
  14. Replies
    14
    Views
    473

    You really don't want a 6/2/1 on a 6. If it's...

    You really don't want a 6/2/1 on a 6. If it's single turbo then it should be twin scroll. 6/2, 1,2,3 into the front scroll, 4,5,6 into the rear scroll. If it isn't twin scroll its a bit of antique...
  15. White kitted S13 H reg Fri 17th May, Derby Sinfin > Willington

    Sort of (artic?) grey cammoflage.

    I was that blue rust bucket in front of you.
  16. AAC is pulse width modulated (PWM). It won't...

    AAC is pulse width modulated (PWM). It won't noticeably click on/off when on the car. It is held wide open on cranking and running off idle.

    There are 2 types of AAC. Early type pushes a spring...
  17. Replies
    7
    Views
    202

    Check the inlet system for oil and turbo for play.

    Check the inlet system for oil and turbo for play.
  18. Replies
    6
    Views
    250

    S13 If it's an early one the brake dust plates...

    S13
    If it's an early one the brake dust plates will be for 258mm discs and would need cutting and bending like petals or the rim removed to fit decent 280mm brakes. As stock discs are 26mm, ZX/S14...
  19. Replies
    8
    Views
    312

    Didn't get any comments but that was 10 years ago.

    Didn't get any comments but that was 10 years ago.
  20. Thread: HID advice

    by skyshack
    Replies
    21
    Views
    559

    Sorry S13. S14a dip projector probably OK. But...

    Sorry S13.
    S14a dip projector probably OK.
    But a converted main beam should be a fail as that's a reflector.
    ...
  21. Replies
    8
    Views
    312

    Doesn't need a switch, 2 diodes and optional...

    Doesn't need a switch, 2 diodes and optional relay. Arsed if I can find the thread.

    One diode stops the fog lamp tell tale on switch lighting up every time the brake is used.
    2nd diode stops the...
  22. Thread: HID advice

    by skyshack
    Replies
    21
    Views
    559

    Just make sure you can replace the bulbs with...

    Just make sure you can replace the bulbs with halogen for MOT.
    Got an advisory last year and was told quite plainly they would fail if presented this year (Nov).
  23. Thread: Plenum

    by skyshack
    Replies
    11
    Views
    470

    It's very unlikely that anyone would fit a plenum...

    It's very unlikely that anyone would fit a plenum with no other mods, doing before and after dyno tests.

    Lots of pretty pictures of bling on E-bay but few of the important bits like the intake...
  24. Replies
    8
    Views
    257

    Check the idle switch is closed. ECU will only...

    Check the idle switch is closed. ECU will only run idle timing with this switch closed.

    Get a dial gauge, find out where TDC is and mark it. Or get a bit of dowel and measure for 30mm (say) before...
  25. Replies
    14
    Views
    537

    Not many other makers run ignition timing off...

    Not many other makers run ignition timing off cam. Not even Mitsubishi who made the CAS.

    Toyota 2JZ has a toothed wheel on crank. Initially 12 teeth, then they went to 36-2 teeth.

    No one has 15...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4