Search:

Hi,

would anyone know the spec of the bolts required for the rear hub to mount ?

The 4 NR bolts, i think 19mm socket ?

Hi Guys,

I have a RPS13 with 5 stud S14 brakes all round.

Which braided brake lines do I require?

Fronts have the hardline to the strut bracket then flexi to joint on inner arch

Are S14...

Does it hold boost fine? sounds like a boost leak to me?

Do you have a wideband is it over fueling?

Can anyone confirm this is a S14 wheel bearing im 90% sure it is. spindle diameter at widest point on knuckle is 34mm
...

Thanks i think it could be s14 knuckles its a 97 180sx

I think it could be S14 knuckles but what i dont get is the 17mm bolts to the strut.. they should be 19mm at the head

Few pics anyway...i...

Done some measuring tonight

hub nut is 32mm which should be S14
17mm nut size to strut should
spindle at nut end itself measured 21mm

Does anyone know if the stock s13 front bearing has a...

Was reading up on this, i think if i check the hub bolt size i should be OK, S13 is 30mm and S14 is 32mm. i agree checking the strut bolts on the knuckle could cause a error if they have been drilled...

Hello guys,

I have a s13 with 5 stud conversion, i need to replace one of the front wheel bearings but im unsure which one to order as i dont know if it has conversion hubs or replacement s14/a...

Emptied, thanks

Id also like to know this!!

Boost Controller or Management with Boost control

Thats all you really need. keep the 740's for now.

Did you ever sort the idle issue?? mine has the same where the idle fluctuates between 600-1200 till it warms up and then its fine.

Also can i ask what size your front number plate is ?

Found a lovely hole in the hardline for the carbon canister on my 180sx.

This is the hardline which runs from the engine bay under the car to a evap canister.

For those who have removed the...

have a set of stock s14 rims with skidable tyres, goodyear tyres shall check tread 40 collected

carluke

Unsure as anytime its dead it usuallt does try to turn over and just doesnt have enough juice to start,

Wheres this exciter wire? Is that the wire on the motor itself

i used an evo 5 battery or the recomendation for one, the terminals are slightly different sizes thus a small screw in the terminal can sort you out :P

Batterys fairy new possibly earth then?

Hi been having this issue for a while now but ive never been able to put my finger on whats causing it

Basically sometimes when i try to start the car ill just hear a clicking noise and it wont...

Andy miller, andy strang(although will prob be just driving briskly around the track :P) and lindsay lgs13 are going, im heading up to this aswell not going on though

used to get a terminal of 109 on old turbo which was ****ed running 1.4bar on standard injectors at maxed duty.. not clever but it worked..

now on refurbed t28 and nismo 555's running 1.25 bar
...

Hi guys basically ive been to the drag strip at crail a few times now, if anyone knows it the surface is horrendous.

Anyway long story short I want to improve times, the best 0-60ft was a 2.3 on...

Id like to show interest in gb aswell

Hi im looking at options for potentially selling my s14a, Serviced every 3k without fail. I would like your opinion on how much its worth, obviously as much as someones willing to pay but i feel its...

not snow just colour of the rocks, i can see what you mean though :)

Some of mine, any comments greatly appreciated on where improvements could be made.
https://sphotos-a-cdg.xx.fbcdn.net/hphotos-ash3/557419_10151657313269217_50205550_n.jpg
...