thanks, so with that adaptor i can get shot of the oil filter housing/ oil cooler and fit an external cooler and join the coolant lines together.
Type: Posts; User: modfather
thanks, so with that adaptor i can get shot of the oil filter housing/ oil cooler and fit an external cooler and join the coolant lines together.
is there an adaptor that goes straight to the block to get rid of the filter housing and the coolant part.
morning all, i know there is a fair few posts regarding this matter but i am unable to find the exact answer to my question so i thought i would ask .
If i was to fit an oil cooler it would leave...
great thanks guys i will get on to it as soon as i can life is quite busy.
i have surefire coilpacks only tested them not replaced as the readings where ok.
i am quite sure the timing as at 15deg
not had the injectors flow tested. cas i believe is ok (looked good when hg...
hi all hope you have had a good xmas.
I have been having problems with my ca18det, misfiring while cold/cool not to bad when hot as in driven for around 10 miles. I do get some blowby with heavy...
a gasket from conceptua was used along with arp studs, its going back in the garage next week.
due to the overheating problems i had before, i had removed the thermostat, no problem taking it back and getting it sorted,
the gasket was done due to pressure build up while drifting
skimmed yes
i had it changed as when i was at high revs the pressure would build up and the temp would rise , when i decelerate the pressure would drop back to normal.
now its in reverse, meaning the...
before i had it done there was no pressure like there is now
i have just had the headgasket done on my s13 (ca18det) but now there seems to be alot of pressure in the coolant system.
when i drove it back (25 min drive) both rad hoses was solid with pressure,...
im looking at getting some uprated coilpacks for my s13 ca18det. i just wonder has/does anyone use these on their car, are they any good.
thats right not by much. i haven't measured the gap but 2 fingers on the passenger side is a tight fit but on the driver side its not so tight, at a guess there is prob a 5mm difference
im not aware of my 13 having a crash. the has only had 3 owners and from the history it has been looked after
its the front sorry should of stated that
i have noticed today that my passenger side wheel sits out further than the driver side wheel by 7mm.
i have kyb shocks at the front, i have also noticed that the passenger side sits slightly lower...
ideal i will do that for now then calipers are moving freely, is there a way to check the abs pump is working as it should.
thanks unfortunately i dont have any time now to work on the car due to other commitments, could i take the relay out for the abs as a temporary fix, by doing that will the brakes still work ok
having a bit of a problem with my brakes, when i went drifting last year the brake pedal went hard and the brakes didnt work great at all while heavy braking, at the time the anti lock light did come...
thanks all for your help, turns out it was the egr valve.
this it the engine fitted it has the code of fq9.
http://www.autoweb.co.uk/media/images/504034/mitsubishi-carisma-diesel-hatchback.jpg
the turbo does work most of the time , i done 50 miles on...
i recently brought another car for family use and today the car started to play up, it didnt want to accelerate past 3000 rpm.
i noticed the turbo was not running at this point, then a little while...
in a way yes, i measured the length of standard rods and done the adjustable rods to the same length with the plan of getting them checked/adjusted correct at a garage.
i dont think the garage had...
i have standard arb`s , i am going to get replacement control arms with the lock stops on. no i didnt get the caster done as the bloke in the garage said that they look fine :(