Cheers guys, i concluded last night after trying a standard ecu on it and it starting straight up that either chip or ecu is toasted.
Type: Posts; User: adam25
Cheers guys, i concluded last night after trying a standard ecu on it and it starting straight up that either chip or ecu is toasted.
Tried chip both ways, still no joy :(
Yes the ecu is off the same year car with a lambda sensor, the original chip snapped a pin when i removed it off the original ecu, but the car ran fine before i installed the chip. The chip is a...
As above i have a s13 CA18DET that im taking to stage 3 with all the required mods, i have installed it all in the car and then tried to start it. Originally it tried to fire but then died and then...
If you need pistons and head gasket i have a brand new set of wiseco 87mm pistons, bought them for my re-build but plans changed when an RB came my way, the hks head gasket is used but only for...
My email is thelangermeister@gmail.com
As above ive aquired an RB25DET engine, which of course i want to bin the SR20DET out of my 14a for ;) ive been having a sniff around here for other members threads that have done the same thing, to...
As above a friend of mine has brought an s12 auto and her plan is to drop a ca18 det in it with a manual box, my question is will the manual brake and clutch pedals from a s13 fit on the s12? Or do...
Sounds like its flooded mate, pull the fuel pump fuse (drivers footwell right hand side, on the lid will tell you the location) and then try to start it. if its flooded it might try and fire but do...
Over the last few weeks my 14 has developed a strange noise, like a ball bearing is bouncing around inside the bell housing.
It only does it once the car is warm/driven, car is stood still idling...
If its the wing mount that is cracked being the problem, you will notice the difference in power once you fit the fmic!
Yeah my friends one did the same, its sucking excess air in that wont have been measured by the maf sensor, you may also notice a lack a power/boost as it will be leaking boost pressure. 156k is good...
Oh your still running wing mount? Bin it and go fmic! Garuntee you the wing mount is cracked.
Remove IACV spray the crap out of it with carb cleaner (not brake cleaner) and refit! 90% sure thats your issue. :)
http://images.tapatalk-cdn.com/15/09/13/7581637fee02361a3ebb20fd82ca09e1.jpg thisismy first S-body
http://images.tapatalk-cdn.com/15/09/13/e466709799856ee799a7a6fe1aaf0399.jpg Unfortunately after...
I would leave mine to a decent friend, who i knew would look after it and not claim it all to be his own doing :D
I had a similar issue on my old 14a when it was warm, took the idle air control valve out and sprayed the crap out of it with carb cleaner and problem went. :D
As above im about to fit a rear brake setup from an R33 gtst to my S14a, ive read all the other topics about different brake hoses and understand that the 14a standard rear calipers have a banjo bolt...
By saying ive checked for boost leaks i sprayed brake cleaner by all the joins whilst engine was running, no change in the idle so i guessed if theres no vacuum leak then there wouldnt be a boost...
If you find a fix let me know :)
I have a s14a with a problem thats annoying me, when accelerating under 3k revs in 2nd gear upwards im getting what i can only describe as a delay/hesitation for a few seconds then it clears and...
Definately VVT rattle.
Hello all
As above i may be being stupid, but is there a late and early sr20det engine? Mines a 1999 T-reg 14a has a sr20det with a rocker cover that uses bolts to tighten it down. my mates 1995...
I have a 99 14a auto just about to reach 100k, my problem is recently when first started (car cold) i drive of down the road normally and it changes from 1st to second then straight to 3rd and...
Going by the noise in the video thats deffinately VVT rattle, my old 14a used to make the same noise to start off with then got progressively worse, if it does it all the time when cold until hot...