The diff ratio is different but I didn't realise it would be so far out, and I can't really find the diff with a better ratio as they seem to be so rare. Ill have a google and try to get hold of that...
Type: Posts; User: raggo
The diff ratio is different but I didn't realise it would be so far out, and I can't really find the diff with a better ratio as they seem to be so rare. Ill have a google and try to get hold of that...
Any ideas people? Someone said to me the signal to the speedo is a pulse, not a voltage? Anyone know what the signal is before I go and buy bits?
I've just built a Mazda b2200 with an sr20det in it and used the nissan wiring, intrument cluster, engine and box with the Mazda rear diff. I found the diff ratios weren't too different as the Mazda...
Hi everyone. Long shot here but I'm really stuck. I have a Mazda b2200 van that I'm doing an engine swap on and I'm putting coilovers on the rear. It has leaf springs which have been kinda of removed...
I just had problems with this look at the ecu plug and see how many tab holes there are on it. Then compare to - http://h-dev.co.uk/index2.php?page=ecutype and you'll know what you need
Hey people, basically I've put an sr20det into a Mazda van and I've removed all the old wiring and stuck the Nissan loom in. But I need some diagrams to know what wires I can remove and so I can...
Ill have a little search when I get on my laptop. Cheers
Went and took some pictures. Thinkin that a s14 engine/ecu loom will solve the problems. I can only see two connectors that join into the interior loom. Are these the same on a s14 and s14a? These...
I was lookin at this hdev info and it says my ecu is s14a and the loom would be for a s14 ecu. But I took the loom out of a 14a shell and the ecu came out of a import 14. The links here -...
Ye whole loom is stripped out of a 14a shell. So should the 14 loom plug onto the interior loom from the 14a? I've got the key, barrel, halo and I don't know what the Siemens box is but I guess I...
Benkids been on the case (I got the engine etc from him) and he put this thread up - http://www.sxoc.com/vbb/showthread.php?542557-Help-identifying-import-Chassis/page2 turns out the engine ecu etc...
This confusion is my fault. I got benkids engine box ecu and afm for a engine swap into a van. I got a different 14a shell to and stripped the loom out but the loom doesn't go with his ecu or afm. ...
I fitted a brand new exedy clutch to my scooby and had the flywheel skimmed and it acted like this. It juddered when pulling away real bad and when decelerating. It took ages to bed in for some...
I'm currently doing a engine swap on a Mazda b2200 pick up so it'll run a sr20det :) I got the engine and gearbox in place and bolted up, wiring loom in place and started plugging everything in....
Cheers
http://i57.photobucket.com/albums/g206/raggo69/image.jpg
The t28 I had before said garrett a/r60 m24 1 - 1
I need help identifying a turbo. I think it's a t28 but it's not exactly the same as my old one I blew up. On the inlet side it has - Garrett a/r60 m24 1 - 2 and I have the numbers stamped on the...
That engine should be mine soon :) I still think you should have sold me the whole car when I came to look at the engine
Ye I can imagine its just not handed out to anyone. I don't know if I would be able to make it work on the van or if it's worth the extra hassle. Is it just the immobiliser or the locks and tht which...
I need some basic help for now and will be back when I get cracking with my project. But I need to know what I need before I start. I have a Mazda van b2200 and I'm going to put an sr20det in it :)...
Lol that Honda meet was weak. Who was the guy with the intercooler on an ek that had an air filter on one end and weren't even connected? It my car here but hopefully will have a new owner this...
that was me :D love my stickers
How do I clear the code?
- Without starting the engine, turn ignition switch to ON.
The engine warning light should now be on solid (bulb test).
- Open the fusebox in the driver footwell and locate the Consult...
I've just done the paper clip fault check test and it came up with code 34, which us knock sensor circuit. Anyone care to explain to me what could be broke or something as u have no clue how to go...