Please pm me the details aswell for a s15.
Price, what's included?
Type: Posts; User: sliding-R
Please pm me the details aswell for a s15.
Price, what's included?
I have cable tied it on the route to the back of the handbrake yes.
The handbrake was awesome for some time though. I have done drifting days aswell but only a handul.
It does still work but...
Both since conversion. I have tightened hand brake as far as u can in cabin now aswell..
Hi dan,
Bought a set of these for my brake conversion a year or so ago and the cables seemed to of stretch so much that I have run out of adjustment.
Is there anything I can do or do I need a...
Hi Leon,
Have you got one? and what price can you do me delivered?
Thanks
S15 is same as s14 not s14a
Leak down check would point out where the compression is being lost.
As said also have you done wet test?
Sorted it. Got them out the freezer and cleaned holes out with my dremel again then took a hammer to them and wacked them in. Tops ones went in as I did the bolts up.
Thanks for the help
Is the vacuum ok to the dv as mine did only flutter when the pipe had split.
Cool, so you actually removed the diff then?
I have had my diff off a few times but didn't want to if it wasn't needed. I was kind of expecting them to slot in with a bit of a push.
Was...
Hi guys ,
Tried to fit my solid DW bushes earlier to the front two mounting points on the diff but could get them to go in, tried to hammer them a little but still wouldnt go.
Will it be a case...
I did it on my last trackday..
Have heard it s common practice. I only overfill very slightly
Right so I should be ok,
I was going to overfill the oil slightly as I feel it gives it more oil movement before it sucks up air?
Hi guys,
I have a trackday coming up at Bedford.
Now I have done a trackday before with standard sump but on road tyres.
But I have now just acquired Yokohama a048s will I need a baffled...
Yeah take fusebox panel off by the throttle in cabin, unbolt the fusebox and go from there. You have to unclip a few from the actual fusebox using a screwdriver. There not just all plugs as such but...
The triangular hole goin from arch to engine bay. I have seen alot of people using tin snips to make hole large fro plugs to fit through from the arch to bay hole. Mine fitted through fine but was...
Same mate, mine is s15 and I have 14 hub on driver side front and has lasted last 2 months
I manage to unplug from back of fusebox in car and didnt need to extend anything but indicator wire.
Didn't even have to cut the hole larger going to bay from arch as everyone seems to have to do.
Yeah the exhaust was redicolously restirctive in the back box. went to 1inch baffle. it sounded like a jet out the back which was cool but not goood with backpressure.
Turns out the exhaust was...
Like :)
My graph etc.
http://forum.s15oc.com/showthread.php?6917-Look-at-the-Difference-an-Exhaust-can-do-once-mapped!!&highlight=exhaust+tune
That isn't strictly true James.
If I remember right you made 292hp and I made 287hp. But I had a very restrictive exhaust.. So I changed it and went back for it to be mapped again and it was 303hp...
May sound thick but was that a joke?
Is the black ones better?
Thanks,
Are these right ones
http://www.energysuspensionparts.com/proddetail.asp?prod=7%2E1118
It's says 240sx?
where do you guys get these poly bushes from?
I want some.... :)