Cheers thanks. That what I thought.
Type: Posts; User: croagy
Cheers thanks. That what I thought.
Does anyone know if an s13 short shifter fit an s14. I believe the only difference between the gearboxes is the bellhousing.
thanks
Craig
Oil in bores made no difference. And used crank sprocket mark to cam sprocket mark 48 and 39 between cam marks.
I set piston 1 to tdc put head on torqued down to manuals specs loosened and retorqued. Lined up cam marks. Put belt on. Counted teeth spun twice and rechecked all was lined up still no interferance.
There's 125000 miles on that engine so I did expect to see some wear in rings.
Doesn't look like the heads ever been off since new
Sorry should of been clearer bout what I meant about the petrol.
Before the head was removed 1234 was 160 90 160 90 psi roughly off the top of my head. Then retested with oil down the bores and...
Yes mate the engine was at tdc before I removed it and cams hadn't moved. Gonna put petrol down the piston bores and check what the rings are doin
Yea all the washers are in for the bolts. New bolts and standard head gasket from conceptua.
is there anythin I could of missed when refittin the valves to stop them closing properly now. Gonna pull...
I don't really have access to a leak down tester. Im starting to think it is the new head that is not straight. Guess ill just have to pull the head again
testing tool is working as getting compression on number 2. new head gasket. no holes in pistons as the head was off and the pistons and bores look good. all cylinders has compression before head was...
my ca had low compression on 2 and 4 so got another head and rebuilt it. new valve stems relapped valves and skim.
put it back on the car all the timing marks are lining up fine and the counted the...
Nice car mate. What front bumper is that on yours?
I'll try cleanin it up first and grease up too then
Thanks
i have an alarm fitted with remote for the locking. the passenger door has the same problem when locking with the key in the drivers side. the motoe held by 2 m10 bolts is very old and is defintely...
When I lock the car with the remote the driver door locks but the passenger door doesn't lock properly. The lock by the handle moves a little but not fully to lock it. The door will lock tho if you...
Need help quick guys literally polybushin the arms and bolts are shagged where I i get them? Nissan only? Or anyone got 2 could post me super quick? They are the ones with the slotted bolt and...
Is there an alternator out that can be used to as an upgrade for the ca one? Seen that guys in us using a quest one on ka's.
i concur download just stops.
S13 with 5 stud from s14 with s14 brakes.I take it need s14 braided hoses for front and rear? They will for the s13 lines front master cylinder?
As above who does everyone use? Recommend?