That's the big ends. Vvt rattle goes when you increase revs.
So in answer to your question, very poorly.
Sent from my SM-G920F using Tapatalk
Type: Posts; User: rick1991
That's the big ends. Vvt rattle goes when you increase revs.
So in answer to your question, very poorly.
Sent from my SM-G920F using Tapatalk
There is no where in the manual that I have downloaded that tells me which pins on the f4plug go to where. Am I looking in the wrong place?
Sent from my SM-G920F using Tapatalk
I have searched the web and found nothing useful.
I can't find any decent info on the wiring. The fsm is not very helpful either.
I just need to find a decent pin out for the f4 plug. But it...
The de bolts in and everything connects as it would on a set engine.
The whole package cost me next to nothing. I also quite fancy a de engine. So it's going in.
I'm just struggling to find...
Hi guys. I have bought myself a s14 shell and an sr20de engine from a s15, complete with loom and ecu.
Has anyone ever done this conversion.
I Am yet to get chance to have a proper look at the...
Sure it would work. Maybe better running a nistune or stock ecu and piggyback. But any engine can take boost.
For a low boost 7-10psi setup in sure it would be a great responsive engine.
Sent...
All welding will be carried out by a friend who is a coded tig welder.
And leak tested before they are sold.
The aim here is to make myself a decent sump, however if there is a market for it I...
I'm looking at designing a baffled extended sump for my ca18det.
The only supplier I can find is Lewis engines in Australia who charge 475 aud plus shipping and import taxes.
If I was to make...
To make up a super easy boost leak tester. Stick a wd40 can in to the piping pre turbo. Something bigger if you have 3"pipes the pull a vacum pipe off and fill the engine with compressed air
...
Boost leak test it properly.
Set the ignition timing. And tps.
Then see how you get on
Sent from my SM-G920F using Tapatalk
The earth that attaches behind no4 is the earth for all of the coilpacks.
They connect by a metal crimp that often splits.
If the plugs are black a sooty then it's most likely an ignition issue....
Have you checked the ignition timing?
What do the plugs look like?
I'd imagine it's a bad earth on the coilpacks pack loom. Would have to pull the loom a part and check.
But the colour of the...
Yeah wide band an such is sorted.
I have no problem tuning the car to make it drive ok.
But I can't face paying 200quid to set it up for a week before mapping.
Sent from my SM-G920F using...
So long story short. I bought a nistune package, 444s and what I was told was a working z32.
The maf which came with it was from spec 1 rb25det.
I have bought a replacement maf, however I need...
Tapatalk won't let me send messages, I bought a clutch off mospin a few days ago.
Now When I try send a message to him all I get is you message cannot be sent at this time.
Can anybody explain why...
The only reason I ask is I will be bringing a couple over to sell on, to cover the ridiculous shipping cost from Japan.
If anyone's interested shoot me a pm over.
Sent from my SM-G920F using...
Wasn't sure where to put it. Cheers pointz
Sent from my SM-G920F using Tapatalk
Could anybody give me an approx value on this wing?
Genuine item imported from Japan.
I know these are pretty rare so hard to judge a value.
For a s13/180 ...
It's all in great condition. About 500 quids worth for a lot less than that. Seems worth the effort. As long as I can sort a starter
So I have been offered a Sr paddle clutch and flywheel very cheap.
And read a few.guides online.
It seems it will all fit with minor. Modifiaction.
Has anyone tried this. The only thing...
I wouldn't fancy putting that sort of money into a ca really. Nice little engine but spending thousand s on it seems like dead money.
Do you have any experience with the holset? I have also seen...
The garrett gtx range look phenomenal but very pricey.
I thought the 71r might be a bit leggy. A few friends run them on 20 det's and they seem a little rough and ready.
My main reason for...
Well the chip depends on the turbo I get. But as far as I've read a 28r will be working over time at stage 3. The car is mainly a drift car so will be at hight revs most of the time. But full boost...
I've had a chat with Noz. Seems a decent guy. He is going to write me a chip for my needs. And I'm on the hunt for a decent stage 3 suitable turbo
Maybe he did. But he also came on to my thread looking for an argument. I asked him to explain his point and he got shirty. Quite sad really. Can't we all just get along. This is why I don't like the...