been having what i thought was fuel pump issues.
the fuel pump power wire has 0v going through it (white w/purple stripe) changes to (black w/yellow stripe)
i'm pretty useless with wiring...
Type: Posts; User: TOK3R
been having what i thought was fuel pump issues.
the fuel pump power wire has 0v going through it (white w/purple stripe) changes to (black w/yellow stripe)
i'm pretty useless with wiring...
Got the pump priming by hard wiring it in with new relay but now it's priming constantly
Where is best to take the trigger feed from ?
I took it from the yellow & blue 12v that's in the blue plug...
Only getting 6.9v through one of the wires to the blue plug in the boot
The top middle pin is getting 11.6v
The bottom middle is only getting 6.9v
So I'm thinking broken or damaged wire ...
Can anyone help with a pic of the pinout diagram for the blue plug in the boot beside the fuel pump
I didn't mean the heat boiling the fuel I ment making the copper in the wire being less conductive when it gets really hot under bonnet.
Just finding it hard to figure out why the fuel pump primes...
Pretty sure it's running a walbro but I'v not been in the tank to confirm.
It's priming fine now & didn't cut out while letting it idle earlier so how could I go about checking the wiring ? I...
Went out in the s13 a couple of days ago it drove fine but when I went back to the car it wouldn't start . The fuel pump wasn't priming I checked the fuse & plug at the pump but coldnt see anything...
thanks for the replys i'll get some liquid gasket in there later
the screws werent too bad but i think the covers have been stripped & cleaned not too long ago
Part of a gasket set ?
Is there anywhere else sells them ?
I'v tried searching but can only find the rubber ones for under the cam cover
looking for the part no. for the small gasket between the breather plate & cam cover
mine is leaking & cant find one anywhere even local nissan garage said theres no gasket there :wack:
ah thank f**k i'v been chasing leaks for days. thought i had got to the end of them & spotted those holes & started to stress that the leak had been worse than a gasket & cam seal
while changing the cam cover seals i found 4 holes in my head :cry:
can anyone advise me if they can be welded / repaired?
also any guesses on what could have caused them
that would explain why the wiring diagram made no sense i thought i was just not following it properly
my s13 has had the abs removed & i'v removed the bulb for the abs light on the dash but the handbrake light still stays on. is it as simple as removing the abs ecu or a wiring bodge? i still want the...
That's superb thanks & yeah it's a uk car
Thanks for the offer but I'm going to upgrade them while it's out.
The bulb behind the speedo was blown & had to take out the abs bulb.
But there's no markings on them so unsure of the size to buy...
can anyone tell me the bulb sizes of the bulbs i've circled ?
i'd be interested in a group buy could do with some apex comfy's
yeah the blanking plate i was talking about i think it might be my map sensor after a bit digging about
the car has no afm & is running a omex 600 ecu i'm starting to think might be a trip to get...
my idle is jumping between 900rpm -1400rpm but only when it's warm & sometimes stalling at junctions . i was going to clean the aac valve & try adjusting it but i don't seem to have a aac valve it's...
got one :D if a mod wants to delete this
looking for another s13 if anyone's thinking of selling
best steering wheels & pedals i'v used
http://www.fanatec.de/:thumbs:
but mayweather will be also taking the same test to it's not like he's at a disadvantage .
& as good as manny is i dont think he will beat mayweather if they fight. will be a great fight though if...
did you see him fight hatton :confused:
hopefully the pacman takes the drugs tests so we can see the two of them fight & tbh if he's clean i don't see the issue