Search:

fitted some r32 gtr seats from my own car into a mates s13 and there were no issues.

Another mate also has 32 gtr seats in his ps13 but not sure if they were bolt in.

I have an s15 with the 15 loom, s14a ecu and engine.

Apart from reqiring a few pins here and there to get the ecu pins to match up I think nats will cause a problem.

It is built into the ecu I...

Sorted this one out, bled it again to be sure and now sits at 75 degrees.

I always use viscous with electric as backup.

Only really had it running for a day or two properly and only yesterday for an extended time.

The temp gauge on the s13 reads just under 3/4 and diagnostic machine shows 110 degrees.

Gonna try...

We have sorted out almost all the issues we have had and have 2 things left to do

1. Add 10kohm resistor+live to rpm to get it to work and adjust tacho to read correctly.

2. This is the main...

my name is Evo I'm using my mates user name so that i can give you sum advice in the right direction, try the fuel pump i understand the symptoms that you are experiencing if it doesn't cure your...

if you can check your fuel pressure under boost do it if not order a fuel pump, and i am sure that it will cure your problem.

would be doing that myself as the turbo parts are indivdually balanced so balancing again is not required and many people have done it before without problems with over 20,000 miles and still going....

I just say the other day on my mates car whilst we were working on it. The turbo is leaking oil on the cold side and has quite a bit of play so the seals are gone :(

We are thinking perhaps doind...

hi i done some knock sensor resistor reading and it was 555 is that ok and ecu is giving me code 34.
thanks

Yep, the previous owner showed receipts of getting the engine changed and paid a £1700 just for the engine and total of £3,500, pff nissan dealers.

The owner said that he was advised by Nissan...

Found something else that looks odd as well, if anyone can explain that would be great.

Should there be some sort of pipe attached to the circled thing? I looked at a few engine bay pictures and...

Yeah the fuel lines are working and fitted, They are not connected from that point in the picture but rerouted a little further down.


cheers pete will have a look and see if its disconnected...

O.k the fuel line is fine, the previous owner had it repaired and the garage must have rerouted it because of damaged to that pipe. The fuel lines are good.

So would code the 34 the knock sensor...

a little update, done a engine diagnostic check and got error code 34. So I need to replace the knock sensor? Could the knock sensor be causing the problem mentioned above?

Still investigating the...

yeah i am actually kind of baffled right now myself lol it does not make sense. Gonna look in the morning and take further pictures and investigate where the pipe is going.

Thank you mate, really appreciate the help.

will look into this in the morning. Now that you say that its the fuel in pipe from the filter then something defo is wrong.

Cheers.

The car drives fine but hesitates at around 3.5k-4k revs and it struggles to go past 70mph. Fitted a boost gauge and it hold boost 8-10psi and doesn't spike etc.

The car is 1994 1.8 U.K car with...