Search:

Type: Posts; User: mospin

Page 1 of 20 1 2 3 4

Search: Search took 0.54 seconds.

  1. Replies
    8
    Views
    346

    Just ran the stock s13 lights wire to both kouki...

    Just ran the stock s13 lights wire to both kouki lights wires so 1 into 2

    Same for brakes 1 into 2

    And double down with thicker earth wire this is what I've done with no problems .

    As for...
  2. Replies
    6
    Views
    438

    ep racing website has four different types off...

    ep racing website has four different types off these lights, 1 set looks close to the above picture.
  3. Replies
    6
    Views
    247

    This is now fixed turned out when fitting the...

    This is now fixed turned out when fitting the front facing inlet I plumbed the idle control valve wrong and back into the inlet the car now starts from cold :)

    Sent from my SM-T335 using Tapatalk
  4. Replies
    6
    Views
    247

    No splines are fine I've manage to get it sitting...

    No splines are fine I've manage to get it sitting on 15tdc now it was a case off adjust the tps and idle screw to move the markings so I could adjust the cas . I'm still not happy where the cas is...
  5. Replies
    6
    Views
    247

    Just noticed I've made a typo instead off timing...

    Just noticed I've made a typo instead off timing setting 10 it's ment to be 20

    As the timing goes from left to right up in 5s so 0,5,10,15,20,25,30

    I can get the cas to 20 but then the cas is...
  6. Replies
    6
    Views
    247

    In my ownership no , engine is from a r32 gtst...

    In my ownership no , engine is from a r32 gtst auto I heard the engine running and everything checked out including compression,

    Since then I've rechecked compression and it's near 174 across...
  7. Replies
    6
    Views
    247

    180sx rb20det timing issues

    Okay this is been driving me crazy for a few months now and I'm completely stumped , I'm doing a rb20det conversion and I just can't get the timing correct

    Closest I can get it too is 10 but the...
  8. Replies
    14
    Views
    520

    Tdc garage services Ltd, Is the new name if...

    Tdc garage services Ltd,

    Is the new name if you need to look him up

    Sent from my SM-T335 using Tapatalk
  9. Replies
    10
    Views
    451

    Slight update as I can't find a rb20 box I'm...

    Slight update as I can't find a rb20 box I'm having a custom prop made which will be with me friday will see if that works and update

    Sent from my SM-T335 using Tapatalk
  10. Replies
    10
    Views
    451

    Update just been told rb housing on ca box is too...

    Update just been told rb housing on ca box is too long I need a rb20 box to make it work

    Sent from my SM-T335 using Tapatalk
  11. Replies
    10
    Views
    451

    So Rb bellhousing 14" Ca bell housing 14" Ca...

    So

    Rb bellhousing 14"
    Ca bell housing 14"
    Ca box is 20"
    Rb box is ?
    Rb box with ca housing 34"

    Front prop is 20.472"
  12. Replies
    10
    Views
    451

    I've no idea it slotted in the spigot bush fine...

    I've no idea it slotted in the spigot bush fine I'm gonna measure the bell housing again against the ca

    Sent from my SM-T335 using Tapatalk
  13. Replies
    10
    Views
    451

    I'm using r32 subframe so engine has been brought...

    I'm using r32 subframe so engine has been brought forward.

    The rb bell housing is a inch longer than the ca bell housing .

    So I'm a inch to long on the prop

    Sent from my SM-T335 using...
  14. Replies
    10
    Views
    451

    Help prop conversion on rb20det

    Can any one shed some light I've put in a rb20det gtst long block version not the short block into my 180sx with rb20 bellhousing and ca18det box .

    I'm having trouble with the prop fitting I've...
  15. Replies
    11
    Views
    410

    Run a wire from battery to injector briefly if...

    Run a wire from battery to injector briefly if you find my old thread there's I write up on it using resistors from maplins as a temp fix

    Just as testing only not a permanent fix and not advised...
  16. Replies
    11
    Views
    410

    I've got a few spare drop resistors but a bit far...

    I've got a few spare drop resistors but a bit far from you

    Sent from my SM-T335 using Tapatalk
  17. Replies
    13
    Views
    464

    I have a box off relays from s body's I've broken...

    I have a box off relays from s body's I've broken send me the pics off what you need and if I have them your welcome to have them free

    Sent from my SM-T335 using Tapatalk
  18. Replies
    1
    Views
    198

    Tourqe settings for rb20det

    Half way through building my rb20det and the time has come to put it back together . Unfortunately I can't find anywhere online or offline on the info I need .

    Is there any experts on here that...
  19. Thread: throttle cable

    by mospin
    Replies
    4
    Views
    238

    Red top Sr I'm sure is long I could be getting...

    Red top Sr I'm sure is long I could be getting them mixed up but you can get a universal throttle cable from demon tweeks

    Sent from my SM-T335 using Tapatalk
  20. Thread: throttle cable

    by mospin
    Replies
    4
    Views
    238

    If you was running a ca18det before the sr20det...

    If you was running a ca18det before the sr20det throttle cable is longer not sure by how much tho

    Sent from my SM-T335 using Tapatalk
  21. Replies
    16
    Views
    842

    Ah okay so it's just a case off removing the...

    Ah okay so it's just a case off removing the damaged spigot bush and replacing it that's a big relief as it looked damaged

    Sent from my SM-T335 using Tapatalk
  22. Replies
    16
    Views
    842

    Okay so here's what I've got any ideas ? Guess...

    Okay so here's what I've got any ideas ?

    Guess that's the spigot bush in there but looks like I'm missing a part compared to your...
  23. Replies
    16
    Views
    842

    Yep that's the one il compare mine tomorrow I'm...

    Yep that's the one il compare mine tomorrow I'm sure I'm missing the centre part and the lip that goes around is flat looks like it been hit with a hammer il look tomorrow to see if it's worth saving...
  24. Replies
    16
    Views
    842

    Lol cheers pointz Sent from my SM-T335 using...

    Lol cheers pointz

    Sent from my SM-T335 using Tapatalk
  25. Replies
    16
    Views
    842

    Crank pictures request

    Does anyone have a picture of the ca crank from the rear behind the flywheel please I do believe the one I have is damage but I'm unsure

    So need one to compare with.

    Thanks

    Sent from my...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4