Search:

Type: Posts; User: Haywes

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Screamer pipe, exits down the bottom of the car....

    Screamer pipe, exits down the bottom of the car. Always ran fine before and can't see any evidence of leaking.



    Black and Blue for 1.2, Black and green for 0.9, as per the chart -...
  2. I've got a good aftermarket boost gauge on the...

    I've got a good aftermarket boost gauge on the pillar, as well as the Profec, which reads the boost and logs the peak etc so I can check it back - they both read the same so there's no issues with...
  3. Tial External Wastegate - Overboosting issue

    Hey guys,

    I've done some searching on here and generally on google and can't seem to find anything super definitive as there's a couple of factors, so i'm hoping someone on here might have some...
  4. Thread: Low compression

    by Haywes
    Replies
    49
    Views
    992

    The way I find I get the most accurate reading...

    The way I find I get the most accurate reading with the dipstick is to remove it, clean it, put it back in about 80% of the way, remove it and clean it another 2 times, then put it all the way down...
  5. Yeah - Kind of misleading name, but I suppose...

    Yeah - Kind of misleading name, but I suppose they are technically constructed as two piece!

    The wet blasting thing sounds promising, I had a look into this. I don't mind doing the polishing and...
  6. The dishes are anodized? I thought it was only...

    The dishes are anodized? I thought it was only the coloured ones that had anodized dishes? Mine just look polished, but I'll definitely look into that to make sure - cheers.
  7. Work Meister S1 2P Refurb suitability/info?

    Hey guys,

    I've been searching through the net on and off for a few days, and thought I'd see if I could get some input from people on here, since I've not had much luck so far!

    I recently...
  8. Replies
    49
    Views
    4,728

    Ah man, saw this for sale and thought it had so...

    Ah man, saw this for sale and thought it had so much potential, and it looks stunning lowered onto those GTR's, Makes a world of difference. Love this car, I'll have to keep my eye out for it when I...
  9. Bought a release bearing as soon as I knew I was...

    Bought a release bearing as soon as I knew I was going to have the box off again. I'll look into a fork too. When I torqued the bolts they didn't seem too tight, but they certainly were a pain in the...
  10. Replies
    0
    Views
    142

    Twin tone S13 and 14a - Bromley, Saturday

    Saw these two driving past as I was waiting to pull out of a car park in Bromley area on Saturday - one real low twin tone S13 that was SWEET, and a mean looking 14a behind it. I was in the white...
  11. Bump - any input? Been out for a drive a few...

    Bump - any input? Been out for a drive a few times, as said it only really seems to initiate when I put the pedal down past half way now and again, but gears still select, fairly certain it goes away...
  12. Gearbox/Clutch grinding noise initiated at half clutch release.

    I've done a lot of searching and can't seem to find anything definitive, just a few maybe's, so I was hoping someone on here might have experienced something similar or know the solution so I can get...
  13. Replies
    10
    Views
    422

    I had a similar problem - I had an XS Power...

    I had a similar problem - I had an XS Power manifold and no XS Power Elbow, so the non XS Power elbow I had ended up nowhere near the downpipe and into the gearbox!

    I did get an XS Power elbow in...
  14. Thread: Coil over help

    by Haywes
    Replies
    22
    Views
    1,014

    Ahhh ok, yeah they are your old ones - still...

    Ahhh ok, yeah they are your old ones - still going strong though. That's a good point worth noting too then, I assumed they were the standard 7/5!

    Although the BC's on the Levin are 6/4, so...
  15. Thread: Coil over help

    by Haywes
    Replies
    22
    Views
    1,014

    I have HSD Monopro's on my S13, my friend has...

    I have HSD Monopro's on my S13, my friend has BC's on his Levin AE111. I found the HSD's to be really good - Ride is good, they absorb bumps and vibration well but they still feel tight and precise,...
  16. Just thought I'd post how I sorted this out...

    Just thought I'd post how I sorted this out incase anyone else has these symptoms - It actually did turn out to be the coilovers, and it was actually a pretty simple fix!

    The dust boots/covers had...
  17. I'll have a look today, thanks bud. Also worth...

    I'll have a look today, thanks bud.

    Also worth mentioning - This only seems to happen when the car's been driven for a while. When the cars just been started, even when driving off the driveway at...
  18. Any other ideas/input from anyone?

    Any other ideas/input from anyone?
  19. Yeah, I checked them, they seem all ok, and I'm...

    Yeah, I checked them, they seem all ok, and I'm fairly certain it's the coilovers because of the way the car levels out - the sudden travel in the suspension. It's like they're extremely stiff,...
  20. Suspected coilovers banging and jerking when compressed?

    I've done a fair bit of searching, and couldn't really find anything that seems to describe whats happening with my front coilovers. Coilovers are HSD Monopro's, seem to be in decent shape,...
  21. Any input/ideas from anyone?

    Any input/ideas from anyone?
  22. Lots of white/grey smoke after turbo change & Low oil pressure?

    So my old T25G decided it didn't want oil seals anymore, so I bought another one to fit up. I know buying a secondhand turbo is always a gamble, and if it turns out this one is faulty, my original...
  23. SRB +20mm front wings/fenders catching headlights?

    Hey guys, just after a bit of feedback/advice.

    My S13 has had the SRB +20mm front wings since I've owned it, and I like them, and they're pretty much needed for the wheels I'm running, but they've...
  24. S14 5 stud front hub/bearing/knuckle wanted asap!

    As above, I bought one recently that ended up lasting me about 1000 miles :(

    If any of you guys can supply me a good one for a decent price asap that'd be great! :)
  25. Replies
    6
    Views
    234

    Ha, I parked my S13 behind your S14 earlier in...

    Ha, I parked my S13 behind your S14 earlier in the week while staying in Bristol after Japfest, wondered if it was someone on here!
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4