Search:

I'll say its the fuel pump...if you have a dying fuel pump when you hit full boost it can't deliver enough fuel and will hesitate and stall on acceleration. Usually really noticeable when you floor...

Awsome! Finally I can read your whole project with pics.... =)

:notworthy:notworthy:notworthy:notworthy:notworthy:notworthy:notworthy:notworthy

Thanks....Just one question, are you venting your sump directly to an oil catch tank and consequently to the...

Shogun that sump is exactly what I've been thinking about.

From where do you connect the oil return lines? You have at least 6 new return lines on the sump...do you have one coming from the rear...

You should check the timing with a timing gun to see where it is at...

I would also try cleaning the idle control valve and reset the base idle...the valve can clogged with oil residue and not...

Jonny Wilkinson that helps a lot! Thank you...

I tightened the tension arms with the wheels in the air...i'm gonna free the bolts up and tighten them with wheels on ground...i don't see any...

CA18DET engine with forged internal. Stage 1 chip, fmic, alloy rad, GT2560R, 3" exhaust and so on...

If by red top you mean an SR20DET red top then no...pure old shcool CA18DET...loool

Car was...

So i torqued up the power steering belt so no slipping.

Didn't drain or disconect any fluid lines. I just unbolted t'he steering rack, lifted it up and installed the new bushings.

I have now...

Hi there guys,

I need your help on a problem.

I just installed a Prothane full bushing kit. Including the steering rack bushings. But now, after lowering the car on to the floor and standing...

Only now did a realize that the above post was incomplete...i haved already corrected it. I'm sorry about that Jonny.

Thanks for the help but i think i already fixed my problem... i bought an...

Sorry for bringing this thread back to life...i have a question that i can't seem to find an awnser...

http://i55.photobucket.com/albums/g121/razzmon/Car/TurboFeeds.jpg

In this pic...in the red...

Did you end up using the ford rs500 intercooler? I'm very intrigued about the parts you used! It looks awsome!

This is what i came up for my short shifter...its an apex performance group buy short shifter...

First i removed the original shifter...
...

Depending on the price...i would have to know numbers first before making a decision...

But the idea sounds awsome! Why did apex stop the production? Was there more demand for the traditional...

I also do prefer your pipe setup...its easier to make and cheaper...and if the alloy pipe have bead stops around the edges then the risk of a silicone pipe popping out is minimum...

Wouldn't a...

This is the thread i stole the pic from:

http://www.sxoc.com/vbb/showthread.php?507415-400bhp-s13-up-for-grabs

You can talk to the new owner of the car as he is still around the forum...would...

The dimensions of the mazda intercooler are core dimension...and rally design also makes a 600x300x80mm core...which is some what larger...

Hmmm...i see what you mean by taking the path with least...

I also have been searching a good alternative for a fmic...and one design has catched my eye. Mounting the intercooler in front of the radiator (where the ac unit would usually go) but keeping them...

There was a chap that posted in the sales section his intention of fabricating mild steel exhaust manifolds...he will be fabricating log style mainfols and runner style manifolds...give him a call to...

Hi there mate,

I currently have some r33 front calipers with 296mm discs to mount to my s13...and i will eventually go z32/r33 on the rears as well.

I would like to know the price for the front...

Is it difficult to install the new seal? What kind of glue did you use?

What would be the best fluid to use? I changed mine but sometimes i get a strange noise when i full lock the steering!

Awsome Idea! Simple and so effective!

Another Vote for STICKY!

Indeed that was a bit harsh croustibat...you need some anger management dude!

From what i've been reading you use s14 hubs and swap the z32 brake hardware on to the s14 hubs...

You can also...

loool...awsome answer...although a bit harsh...