So does it do it every time you initially accelerate hard?
e.g If accelerate hard, go back down to the same speed and accelerate the same again does it react the same?
If it “splutters” then...
Type: Posts; User: shikari chaos
So does it do it every time you initially accelerate hard?
e.g If accelerate hard, go back down to the same speed and accelerate the same again does it react the same?
If it “splutters” then...
Strange..
You checked fuel Pressure?
Electrical connectors? Maybe somethings loose, Such as CAS, coils, plugs, ECU, fuel pump, O2 sensor, main battery terminals or engine grounds etc.
Always fun fault finding XD as people have said:
1:Check plugs and sockets on the coil packs, injectors, ECU pins/plugs and coil pack amp. Worth looking at grounding points too.
2:Swap coils, see...
Lots of factors effect oil pressure from temperature, sensor position, oil grade, rpm etc so hard to say but this thread should give you a rough guide:...
Not sure how into photography you guys are but just a bit of an FYI. Taking photos of your lights with a phone camera that varies it’s colour balance with every shot is not an accurate way to show...
As Ben mentioned not all Journal bearing turbos need an oil restrictor. Oil feed pressure and turbo design vary so no strict yes or no.
Make sure you have a clear drain hose with a smooth downward...
From memory if you’re using aftermarket oil lines then you need to fit a restrictor.
Think it’s the S14 oem oil feed hard pipe banjo bolt that has a restrictor built in.
Love the TVR T350 shape and sound but will never buy one. One of my close mates used to work at a TVR specialist on engine build, mapping and general maintenance. As he said, "Great being a TVR...
^ I’d be careful doing this because you can stretch the studs and make them weaker and would then have to replace them. Looks like it might not be an option to use normal hex bits on these wheels...
Erm Boss mode engaged! :D
I was thinking about doing this once I bite the bullet on an ecu. My only reservation was start up time for the tablet or whether in effect you just leave it turned on...
Also interested in this for an S13.
One of the guys that makes sill sections on here mentioned in his thread about possibly making rear arch/quarter panels..
Great share. Features two of my favourites cars of all time. Funnily enough I think I’ve sat in that exact Miura many years ago! To add to that my grandfather helped design the GT40 :D
Must be...
So, the search on here should give you a wealth of info but basically, Nismo are slightly stiffer than standard,don't transmit too much vibration or noise. Vibra technics are great but approximately...
Hey all,
Just wondering if anyone has done the oil pickup upgrade to an early sr20det? If so is it literally bolt off bolt on?
I believe these are the parts needed?:
S14/15 Oil strainer pickup...
Going on what Hamish said then nope lol.
Garage defend stuff looks decent, anyone know where to get them from without being charged the earth?
Whoops, Might give Mtec a go myself.. seems like they offer a view variants.
Thanks Bren, appreciate the response. As Jonny pointed out this has already been covered in other threads so my bad for starting a new one!
I'll definitely be keeping my eyes open for that list :D
Hi guys, just went to check some parts on your website and it shows your site as being disabled?
Anyone on here know anything or having the same issue?
http://apexperformance.co.uk
Dexron III ATF
Brilliant, that's goood to know. RHD Japan have them but you can get a pair via eBay U.K. stock for half their price before shipping.
Like you say, hard to know what's genuine though and how much...
Hope someone can shed some light on the situation. :wack:
My car currently has two different front headlights, I'm assuming one jdm and one off a U.K. S13
One of them has a horrific light pattern...
Well that explains the single output.
I'm just thinking about buying this myself so glad this has popped up.
This should clear things up:...
By the sounds of it you have an abs master cylinder but no abs? How many outputs do you have from the master cylinder?
Ahahaha classic snowboarder fail pic!
Chairlifts tho... really? It's the button lifts or T bars that are shit when you're a beginner. On a chairlift you're literally sitting on a chair for 99% of...
He had a brake disc stud issue that caused the judder under braking. The rack caused "tight steering". Im assuming you didn't read the thread or som how managed to miss posts 7 and 9 that tell you...