Drive an F10 and drive an XF both before making your mind up then :)
Type: Posts; User: munkul
Drive an F10 and drive an XF both before making your mind up then :)
the Jag XF is better than the e60 5 series in EVERY WAY, i should know cos I have had both :) I'm 26 and age should not be an issue, it's the first truly NICE jag to be made for years. And it's a...
never played 3, but loved New Vegas. Horrible on the xbox but brilliant on the PC. 122 hours final count of game play hours, all the DLC as well.
I will be getting 4 as soon as I can!
The fuel pump only runs for like 5 seconds.
Sent from my SM-G900F using Tapatalk
You dont mention having checked the plugs yet? If they are wet after cranking, its ignition related. If they are dry, its injector related, or earths/cas. Its as simple as that. You need to check...
the reason why the VCT sprockets rattle is down to the valvesprings being more powerful than the VCT return spring. The VCT spring is obviously not strong enough to begin with, but as soon as you...
genuine mikalor clamps are much more powerful than jubilee clips.
That said, I have never had much of an issue with cheap mikalor style clamps either - had a couple fail, out of many dozens -...
Ive just bought a XF 4.2 V8 n/a and yes, there is no catch! They are a fecking TON of car for the money!!!! I almost wish I'd stretched to an SV8 but to be honest, 300bhp is enough, and mine has...
pistons are a bit soft at that level. they can take it according to internet lore, but they wont take any error margin in the mapping. I would run forged pistons for peace of mind.
And since its...
cheers :)
Photos from the Nurburgring
Completed a journey there and back, with ZERO issues :) didnt even have to raise the bonnet! Only complaint is the droney exhaust... I am going to have to...
You'll probably need to add friction modifier to the oil. It will soften the clutch friction a little and give easier and more gentle lock-up, doing away with the clunk :)
big compressors always win at life!
Doughnuts for 30 mins... made me laugh!
in the flags, is the O2 sensor flag enabled? If so, disable it.
edit: injector latency might have something to do with it... I remember fine tuning my latency on a MS2 by doubling the pulses/min...
Are you 100%, nay, 110% sure, that you havent cross-threaded the caliper on the inlet? It's easy done, I'm pretty handy with cars but I destroyed a skyline 2-pot just a few weeks ago so I know how...
What technique are you using? Are you making sure the bleed nipple is fully shut before the pedal returns upwards? Also try shutting the nipple before the pedal gets to the bottom...
Sorry if I'm...
dude... come on. It's a Blitz Nur Spec. Those things are stupidly loud. Just fit an extra silencer box or butterfly "quiet" valve or something like that. At the end of the day an excessively loud car...
I would have done the rear subframe bushes FIRST, they are soggy right out of the factory and only get worse. Get some subframe locking collars as a stop-gap, or I dont think the new suspension will...
Any flammable aerosol (brake cleaner, easy-start, hairspray, deoderant, etc) plus lighter. its THE easiest way to do it. Observe.
https://www.youtube.com/watch?v=GmMsBSbFq-g
The smaller Bose speaker is very impressive; the larger one (in OP) not so much.
I was blown away by a pair of large SONOS speakers in our chalet in January this year. Between the two of them, the...
I've just done it with Flux direct. Mirrored my 6 years NCB from the bmw to the s14. £700 all mods declared... could be worse.
the bolts next to the diff should have a flat sitting against the UJ :confused:
Then you get a ring spanner on the diff side... that and a lever to hold the prop should be all you need...?
he needs some aerosol and a lighter. Easiest way to mount beads ever.
EDIT: And, of course, so much fun lol
225 tyres should go on so so easily onto a 9j rim though!
I've never seen one yet that wouldnt fit a 9j rim, even if it needed explosions to seat the bead.
take the spring off the pressure cap so its running atmospheric pressure. That way it wont (or SHOULDNT) fail suddenly. Drive it nicely, e.g. no extended drifting or high speed runs.
Then replace...