Yes you need gtst subframe
Also a gearbox mount made or just weld a plate same level as the one you may have and redrill the holes.
Also may need to modify the sump/space the arb
If you are...
Type: Posts; User: Carboy280
Yes you need gtst subframe
Also a gearbox mount made or just weld a plate same level as the one you may have and redrill the holes.
Also may need to modify the sump/space the arb
If you are...
Get your soldering iron out again 99.9% certain it will be 1 of the pins on the back of the cluster
Sent from my iPhone using Tapatalk
Checked fuses??
Sent from my iPhone using Tapatalk
Check your grounds for ecu may not be ground properly so the ecu can’t ground the injectors
Sent from my iPhone using Tapatalk
Bought tickets so will be there but on individual display as a mate is taking the RBRX7 we have just finished i'll be in the red RB14a [emoji106]
Sent from my iPhone using Tapatalk
Yeah, was just an indicator of the part. Fortunately managed to get beru ones for mine ran awesome on my 400 SR and running sweet now on my 550 RB
Sent from my iPhone using Tapatalk
http://www.eurocarparts.com/ecp/c/Audi_R8_5.2_2014/p/car-parts/ignition1/engine-parts/ignition-coil/?413440561&1&f0b3aa051e9b0e492eb942b665b9035eb971716f&000197
Sent from my iPhone using Tapatalk
Whats it not doing? Sometimes they work again if you re-solder all the pins on the back of the unit [emoji106] i know it worked with mine [emoji16]
Sent from my iPhone using Tapatalk
Well, i never knew they were different sensors, guess i must be lucky my rb temp sensor works perfect on my s14a dash [emoji106]
Sent from my iPhone using Tapatalk
Sticky thermostat?
Sent from my iPhone using Tapatalk
I would recheck the crank angle sensor bud, have a look on youtube too about how to fit it. Can be a bit of a pig
Sent from my iPhone using Tapatalk
+1 for just getting long
But another thing to make the job easier for you is getting full thread unions
Like this http://uploads.tapatalk-cdn.com/20161026/76082d33ad3a293105de809decf60134.png
As...
Pm'ed
Sent from my iPhone using Tapatalk
Great guys these [emoji106]
Sent from my iPhone using Tapatalk
Theres a couple of guides. As long as you can use a soldering iron and heat shrink you will be fine.. only 8 wires need joining then coilpack loom needs modding, get stuck, give me a pm
Sent...
Get some Audi R8 coilpacks only smidge more money but can't go wrong with them [emoji106] can get rid of ignition amp too
Sent from my iPhone using Tapatalk
Yep they are red haa. whats the numbers on them? I have a second hand set for sale 😂
Can check against them for you.
Sent from my SM-N9005 using Tapatalk
Ha video will be soon! Just mapping her this week been running on wastegate pressure up to now!
Got some more material to make a rear diffuser too 👍
Cheers guys ☺
Sent from my SM-N9005 using...
Ok so alot happened since my last post..
Was happy how eveything was going on the car SR running 400bhp etc looking ok.. then a friend with an RX7 decided he was going for 500bhp and another with a...
How much of the coilpack wiring did you check? As ive had it before where in that part of the loom there is a single black cable that goes to the block but in the loom is joined together with 4 other...
Yeahh.. Mine might have more powerz, but yours is far tidier ;)
Looks awesome bud!
Looking awesome bud :) gets even better when you have 400+ :P
Haha as you do on the sx
Yeah! Keep looking at them, might make up my own farbon version as remoulding the rear bunper made me realise how easy fibreglass is to work with!
Got your thread...
CJ Auto's think it was round the £400 mark, but you need a engine hoist too.. But think they do one that doesnt require one and its about £500? Dont hold me too it though
Its defo happening, already have the paint :P
Can borrow mine if you ever need it, might be a mission to pick up though! Ha