Just paid for three cars!
Thanks,
Type: Posts; User: Ashers
Just paid for three cars!
Thanks,
Heres the box on the drivers door.
http://img.tapatalk.com/d/14/07/24/bu7y2adu.jpg
Just powered the motors up. Both windows went down and up.
The windows have never worked since I've owned the car. Only now that it's built it's something I want to look at.
That could prove handy if needed! Cheers
Ah okay. I don't have speakers fitted but my drivers mirror works, and my passenger mirror doesn't. So that could be the plug. I've checked the large 30a fuse under the bonnet but not sure if there...
I'd say that its a safe bet that its a 180 loom.
So I could meter the drivers door switch to see if theres 12v on one of the pins (with IGN on obv.), then to the amp (Brown box?) and then the...
I do have the S14 FSM but thought it'd be different.
The door cards are off and things look plugged in. Didn't realise there was plugs in the A pillars though! Removing them might be a bit awkward...
Looking for some help.
For reasons unknown the windows on my PS13 do not work.
I'm really not sure where to start with the fault finding process on this. I've tried finding an S13 FSM but have...
Pretty sure we've sorted one out now. Be interesting to see some pictures of it though. How long have you had it?
Sent from my iPad using Tapatalk
Yeah did come across that site. Potentially found a screen but not sure yet.
So I'm in desperate need for a new rear window in the back of my PS13.
Nissan can get one for £700!
Does anyone know someone, who have an idea where I can get the glass!
And does anyone have...
Yeah I think this is pretty much what I'll end up doing to be honest. Then maybe a fusebox relocation down the line.
Thanks for all the advice. I'm still not 100% sure I want to go thru with this, or even need to.
I am definitely going to redo my headlight loom as I only wired up quickly, and it's pretty shabby....
Right, heres a rough list of things I think I'll need/want.
Original dash wiring
Aftermarket gauges
Heaters/blowers
Windows
Wipers/washers
Lights
Switch panel with kill switch
Fuel pump
Correct skyshack, I don't have a rear wiper.
I would cut the dash out and remove the interior so it makes it easier to get at. I'd replace both lighting looms and have them as a separate loom to...
I've been thinking recently about removing all the shody wiring from my PS13 that I have done in order to get it running, and replace it all with a freshly built, essential only loom.
I'm not...
I got mine off ebay.. Just a simple D1 spec. Has three take offs for sensors. Comes with blanks to so you can block off any you don't use..
Hi,
Looking at getting a Stage 4 for my SR20. Does the kit come with the release bearing and everything needed to fit?
Ash
Ah I see. Best bet would be to post a wanted thread on here and Driftworks if your on there. And looking in the breakers thread from time to time as well.
There's also GDUK Jap Parts and DriftBitz...
External trims?
The doors are the same as S13 UK so could be easier to get some of them.
Done a bit more checking yesterday.. The smaller wire I've traced to the alternator fuse (which I've checked to) but from the fuse onwards I'm having trouble. There isn't continuity from the fuse to...
Had a quick check today on this..
Looked for continuity between the red/white wire above and either of the white wires on this plug pictured below. The one of the side of the alternator.
There...
One of the small wires on the alternator? Would that be on the plug that fits into the alternator? If so I'd wanna be looking for continuity between there and the plug at the dash. Or would it be in...
Hi all,
Have had issues with my charging system on the 14a SR20 fitted in my PS13. Decided to start having a look and see whats up with it last night.
First of all I've checked that there is...
Yeah I did as a matter of fact. Turned out to be my MAF wiring in the end.