Search:

Type: Posts; User: Mike41288

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    9
    Views
    90

    You can also try a guy named John Pearson on...

    You can also try a guy named John Pearson on Facebook, think his brother is on here too, sxjamie. Join the 200sx buying and selling pages on Facebook too as you will have a much wider audience
    ...
  2. Replies
    9
    Views
    90

    https://www.amayama.com/en/catalogs/nissan/silvia/...

    https://www.amayama.com/en/catalogs/nissan/silvia/6-coupe-right-s14-1993-1416/accessories-9/instrument-panel-surroundings-parts-775

    Not UK based but they have so much OEM stuff and can deliver...
  3. Replies
    2
    Views
    51

    Possibly alarm related. Vaguely remember someone...

    Possibly alarm related. Vaguely remember someone asking this before and the dial was for alarm sensitivity adjustment. Not 100% sure though

    Sent from my SM-G973F using Tapatalk
  4. Thread: E 10 petrol

    by Mike41288
    Replies
    8
    Views
    127

    Anything rubber that the fuel comes into contact...

    Anything rubber that the fuel comes into contact with will need to be resistant to ethanol or the ethanol will break it down, causing clogged fuel filters, injectors and possible fuel leaks.
    People...
  5. Thread: E 10 petrol

    by Mike41288
    Replies
    8
    Views
    127

    .

    .
  6. Replies
    14
    Views
    332

    Jeez, you arent wrong about them being a bit...

    Jeez, you arent wrong about them being a bit lively! If I bought them and hadn't seen your comment, I would have been seriously worried. They feel like solid engine mounts currently but I gotta still...
  7. Thread: Rust s14

    by Mike41288
    Replies
    5
    Views
    116

    What's your location? Without even seeing it I...

    What's your location?
    Without even seeing it I would expect it to be in the 1000s if it's rusty enough to poke holes in it. It's time consuming work and when your looking at 300 a day in labour at...
  8. Replies
    2
    Views
    54

    They should be good to go straight out the box ...

    They should be good to go straight out the box

    Hub nut is 206-284 Nm (152-210) ftlbs) according to the manual
  9. Replies
    1
    Views
    99

    eBay Baffled Sump Pan

    Anyone got any experience with these?

    https://www.ebay.co.uk/itm/324597744055

    I don't normally give a second thought to Chinese items sold on eBay but these actually don't look to be bad...
  10. Replies
    6
    Views
    163

    The viscous fluid unit is sealed and is separate...

    The viscous fluid unit is sealed and is separate to the normal diff fluid. Just normal 75w90 from your favoured brand is what you wanna go for

    Sent from my SM-G973F using Tapatalk
  11. Just get a VAG coil pack conversion. Even if it...

    Just get a VAG coil pack conversion. Even if it doesn't cure your problem it's a very worth while upgrade as the coil packs will most likely be very old. I went for the 1.8t coils as they sit lower...
  12. Replies
    9
    Views
    217

    Due to the pressures that the line sees, I doubt...

    Due to the pressures that the line sees, I doubt you will find a quality replacement/aftermarket line for a cheaper price than what you have already found. I intend to go for the Chase Bays...
  13. Replies
    3
    Views
    89

    Service manual says anything above 0.78 bar at...

    Service manual says anything above 0.78 bar at idle and 3200rpm 3.14 - 3.92 bar.
    Oil Pressure changes with RPM as the oil pump is crank driven. Not sure that your oil pressure is related to the...
  14. Replies
    3
    Views
    89

    I believe anything over 0.7 bar oil pressure is...

    I believe anything over 0.7 bar oil pressure is fine on an SR. Haven't checked the manual for a while so I'm not 100% though. At around 90 degrees C, my pressure is around 1-1.1bar at idle. Low oil...
  15. Replies
    7
    Views
    142

    Either helicoil it or drill it out and tap it for...

    Either helicoil it or drill it out and tap it for a larger bolt, anything else is just bodging it up.
  16. Replies
    23
    Views
    997

    But what if the OPs car is twice or 3 times as...

    But what if the OPs car is twice or 3 times as bad as yours rust wise?

    Sent from my SM-G973F using Tapatalk
  17. Replies
    23
    Views
    997

    Rust repairs vary in quality and price depending...

    Rust repairs vary in quality and price depending on how bad it is. If its really rotten and you want oem looking repairs done then it'll be more expensive.
    If the rust repairs that need doing are...
  18. Replies
    23
    Views
    997

    Last I heard, he has a 2 year waiting list,...

    Last I heard, he has a 2 year waiting list, probably not too fussed about booking stuff in that far in advance.
    You could look around for classic car restorers within an area you'd be willing to...
  19. With the state of that, you could possibly...

    With the state of that, you could possibly contact some youtube detailers to see if they wanna detail your car for free for some content. Looks perfect for a big clickbait title like "Dirtiest 200SX...
  20. Replies
    4
    Views
    301

    Repairs that pass an MOT and repairs that last...

    Repairs that pass an MOT and repairs that last are 2 very different things. Unfortunately, poking something with a screwdriver and it not going through doesn't guarantee that it's good metal that can...
  21. Replies
    3
    Views
    100

    Also, if what I've found is correct, this means...

    Also, if what I've found is correct, this means that anyone running the same engine and gearbox mounts combo (HardRace OEM style) is also running almost +4 degrees extra front prop angle? That's got...
  22. Replies
    3
    Views
    100

    I just tried that app and it confirms what I...

    I just tried that app and it confirms what I thought but still been unable to find a definitive answer to the gearbox to front prop angle question. I did find this picture though which seems to show...
  23. Replies
    3
    Views
    100

    Any drivetrain angle specialists?

    Just measured my driveshaft and pinion angle on my car and found some surprising results! Running HardRace engine mounts and GKTech Solid Subframe mounts with 8mm spacers to the body, I thought it...
  24. I second this. I wouldn't take my car anywhere...

    I second this. I wouldn't take my car anywhere else for the bits I can't do. He has a great knowledge of all s chassis but will work on anything

    Sent from my SM-G973F using Tapatalk
  25. Replies
    6
    Views
    211

    Your best bet is to go and ask a local mechanic...

    Your best bet is to go and ask a local mechanic how much.
    Your second best bet is to put pictures of your engine bay and intercooler kit up, also let us know if it's a kit that goes through the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4