Hello
I have a 1995 S14, (sr20). Its running an AEM series 2 EMS (map based) forged pistons and rods (standard CR), BC 264 cams, nismo 740 injectors, straight through exhaust, 340lph fuel pump...
Type: Posts; User: rob321
Hello
I have a 1995 S14, (sr20). Its running an AEM series 2 EMS (map based) forged pistons and rods (standard CR), BC 264 cams, nismo 740 injectors, straight through exhaust, 340lph fuel pump...
AFRs are good on boost, when the FPR has to restrict the return flow. However at idle when it has to open up seems to be when it can't return enough to the tank hence the high fuel pressure
...
Hi
Today I measured the fuel pressure and it was 3.5 bar at idle and pinching the vac hose made no difference...
I have a 340lph fuel pump and nismo 740's
Has anyone else had this problem...
My walbro pecked up after 500 miles. POS
Sent from my iPhone using Tapatalk
Thanks mate I'll have a look at that :)
Sent from my iPhone using Tapatalk
Quick update, jacked the rear up and put the handbrake on and is stopped. Driveshafts are all good so got me thinking it must be the diff. All I did was clean it out whilst it was removed?
Sent...
It's hard to pinpoint the noise whilst being sat in the drivers seat, I'll try and get her to let the clutch out whilst I look underneath some time.
Yes same clutch. Is a comp clutch and flywheel...
Hi.
Noise is there when pulling away ie engaging the clutch. In the video the rear wheels are off the ground and I'm just letting the clutch out in 1st. Car drives fine and once moving is quiet....
Just done this on my s14 so thought I'd share :) I couldn't find a complete guide online.
This is useful if you've done a gearbox conversion, in my case a z33 gbox that doesn't have a speed sensor...
The full kit cost me around 1700 after they hit me with import tax :/ definitely one of the more expensive methods. However I like the fact that nothing needs machining and you can do the whole lot...
Full of nissans finest :)
Sent from my iPhone using Tapatalk
I replaced the bearing and it was a nice snug fit on the shaft :/
I drove it again today. The noise is not there when it's cold which is really strange but once warm it starts!
Sent from my...
Sprung
Sent from my iPhone using Tapatalk
Hi
I just finished putting a 350z box on my S14 using the mazworx srvq kit. The car drives absolutely fine, clutch feels normal and all gears engage well. However there is a loud rattling noise...
All sorted now. Thank you
Sent from my iPhone using Tapatalk
FWIW, before i removed the engine, it turned over but wouldnt start and the red light was on the dash. When i turn the ignition on the fuel pump doesnt prime, when it would disarm it used to prime??
Nats 1 I believe
Sent from my iPhone using Tapatalk
Hi
I'm rebuilding an s14 at the moment. The alarm/ immobiliser is temperamental at best of times and I'm looking for a way to bypass it
I understand this is a public forum, if someone could...
Hi
I've been searching through the forums and it seems the general consensus is that to get 500 crank bhp from a sr20 its not worth it and you need to spend 10s of thousands etc... and i cant see...
http://images.tapatalk-cdn.com/15/10/21/db6c533e72aba12d96ecb9c078ebc53c.jpg
http://images.tapatalk-cdn.com/15/10/21/60becd81cc2829b91b71e3d55b7a01a8.jpg
Got these bc 264 cams for cheap, he...