Guys,
Will the stock S14 front seat belts fit in a S13?
Cheers,
JCD
Type: Posts; User: JCD
Guys,
Will the stock S14 front seat belts fit in a S13?
Cheers,
JCD
I think I can understand about the restriction but why is the high water speed through the thermo housing?
You shouldn't have oil pooling in the drain neither.
These brackets are not just there for fun.
The cornflakes-box-style gaskets at the inlet can start to leak when you take them away, which is a nasty fault to trace and even more nasty to repair....
End of July I went to the Superflow rolling road.
The result is in line with what I expected - 279hp and 313Nm, reaching 200Nm just over the 1800rpm, so less power but more torque than the...
aka Check valve for hydraulic valve lifter (11036-D4200).
This item has been unavailable for a long while AFAIK.
I was able to order two pieces of these from Humphris Oxford in the UK via their...
The noise :)
http://s584.photobucket.com/user/Four_stroke_guerrilla/media/S13/P4140005_agk_zps73d4e8c8.mp4.html
The throttle body is doing fine as well as the idle switch workaround.
I moved the air filter from the left to right side of the engine bay.
It's placed now where the battery used to be.
Some...
This is good info, thanks.
Was that with the restrictor in?
I can't see why this would be different for Tomei pistons.
It might be different for a different material of piston rings but as we are all using the same cast iron engine blocks I really can't see...
It was not possible to find a 4-in-1 header that fits the CA18 with left hand drive.
All JDM stuff will fit RHD but no guarantee for LHD.
I didn't want to pay for shipment and import duty and get...
:D:thumbs:
Yes, good question.
I haven't seen a single broken TPS sensor yet.
How did you diagnose the sensor?
Is it the potmeter part or the idle switch part that is bad?
Yep.
It has a bit inside that you don't need -the full throttle switch- but it's not wired in your engine harness so it won't do no harm.
You can use the TPS from an automatic straight away without any modification.
It might be a bit more expensive that's all.
Is there an immobiliser ?
Very little about our cars but still interesting.
Best is to save the pdf's; you never know how long such info will be available.
...
The o-ring for the fuel pump cover has the Nissan partnumber 17342-01A00.
I replaced mine with an industrial item in Viton (which is better than nitrile rubber) 120mm diameter, 4mm thick.
Link to...
In the past I've seen that kind of problems solved with injectot cleaner. But it was not on S13 and it seems to me that in your case the problem is worse than it was there.
How many miles has the...
Is that while driving or while revving in neutral?
As mentioned in the previous posts, check for bost leaks and ditch the hot start solenoid.
You have PM :)
:no::ghey::p :)
Thanks
Can you send me a picture?
Just making sure all is clear: it should fit on a CA18DET engine, in a S13 Rear wheel drive, Left hand steering.
The CA18DET engine came with a turbo but I replaced it by a supercharger.
Currently I'm using the stock cast iron manifold and a 10 years old Mongoose exhaust line.
The hot side of the turbo was...
I installed one of these 70mm shiny ebay "universal throttle bodies".
Compared to the stock item it is very bulky and it was dropped-in somewhat temporarily so I won't post a picture of it right...