Search:

Ive tested a solenoid of megasquirt, but without success. Dont measure the resistance of solenoid.
regards

Hello,
ive a problem with my greddy profec b2. It does works 1 year without problems. No matter what settings I used, the boost pressure continue rise up. I measure the solenoid, it has a resistance...

The problem was due to the spark plugs. With Denso Plugs the car makes no problems!

http://i124.photobucket.com/albums/p33/Hafkai/hannes-afr.jpg

At 1,38 the dropouts begin.

Here is the recording from Logworks. Begins at 7min.

http://backyard-tuning-cottbus.de/log.rar

ive seen today on the logworks file the afr goes not under 11. So i think its okay!

We made some new tests again. At 11psi the car makes no problems and at 13psi starts the problem with the dropouts. Ive checked another z32 afm and other ignition coils without results. We have seen...

I've just done a test drive. If I drive full speed at second gear the engine dropouts over 4500rpm, if I then shift in the third gear the engine makes no problems between 4500-7000rpm!

I driving...

okay thank you! the fuel pressure should be okay, there are all parts original. But i would check AFM and i would look for boost leaks.
Thanks!

Currently I ride with 17psi! What is a good ratio at full power? If there is enough fuel, how can it be that the engine hasnt enough air?

Hello,
ive change a lot of parts in the last time. So ive installed a new big fmic, a k&n air filter kit and a mongoose catback.

The engine pulls up to 4000-4500rpm without problems. Between...

has nobody any other ideas?

The noise never made a knocking sound! Its only a short buzz, but if i drive a few hundred miles the noise is getting longer.

Ive put on the sommer tires for a few weeks and we look that all nuts tight! That cant be the problem!
Im sure the Diff was good! It was in the s14 of a friend, and he never had any problems!

Hello,
ive installed an s14 Diff in my s13 and since the conversion the car makes a strange noise. Its only, if im drive for a while and all is neatly on temperature! The noise comes when I turn...

I got my information from:
http://avid-speed.com/de/turbo/garrett_gt28r.htm
There i buy my turbocharger!
So I drive the whole time with almost 1.5 bar and think that everything is okay and I kill...

thanks for the fast replys.
I think the gt28r (gt2560r) has a maximum boost pressure of 1.5 bar?! At the moment i drive with 1,25 - 1.3 bar!
Whats a MHG? Im from germany, please do not use so many...

Hello,
I have identified the problem. It was the connection between the camshaft and camshaft sensor.I drove the whole time with variable ignition timing! :annoyed:
So I changed the camshafts and...

who is jz at HD ? sorry i dont unterstand.
the injectors was yellow. I dont have check them! The changed parts in the fuel supply are the injectors and the walbro.
In the next days i get an...

I have this turbo:
http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/GT25/GT2560R_466541_4.htm
i would look for a fuel pressure gauge! And i get an Innovate Wideband LM-1 in a...

i dont know how i can check the fuel pressure when i drive? I dont believe this is a horsham chip. The turbo also called gt28r.
regards hannes

hello,
im from germany, so excuse my bad english.
I was on Friday on a dynamometer.
My Sx has a complete stage 3 setup. the result of the dyno was very disappointing. At 1,4bar it makes 261hp ,...