Wires lok fine and I have no fan just twin electric. Anybody got a spare cas I could borrow or buy ?
Type: Posts; User: Shaneyboi
Wires lok fine and I have no fan just twin electric. Anybody got a spare cas I could borrow or buy ?
Didn't unplug it at all or remove it
I've just noticed the wires going to cash were freaking so I soldered them not it seems like it's missing and stalls when I stop any help would be great
I've never looked how do I find that bit on the commander ? And wouldn't Greg a pro tuner found that while he was mapping? Thanks for the help and advice.
Anybody got any ideas what it could be ? ??
Also when I first put the engine in it had 740cc injectors standard coil pack and nistune bored and it still hunted for revs then now it's got power fc 1000cc injectors splitfire coil packs then...
Yes
Hi I put a new forged engine and turbo injectors ect last year and I've had it all mapped by Greg at pro tuner. But since I've put this engine in it hunts for revs 750-1000 on idle sometimes it drops...
Checked it and it was reading low volts so I just retired a new ignition live and all is good thanks guys.
I have used the ignition live from the stereo and it goes off and stays off until I turn the car off then go bk to ignition on then it comes bk on. But the stereo stays on when the boos controller...
Anybody got any idea why I could be doing this ? Thanks.
I've took my dash out and put a flocked dash in and I tufted all the wires up while the dash was out. I've now re wired the boost controller and it comes on when I put the ignition on but then goes...
Hi can I take out the box under the dash that says acu 241 on it if I no longer use the nissan alarm? Also can I take out the passenger air bag and all wiring including the bit under rear seat ? as...
I've got a micrometer so I'll try measuring the cosworth bit sticking out. And d low not sure that will be accurate enough lol
I have a forged sr20 and it's got a cosworth multi layer head gasket but it's leaking oil out from where the gasket is so I was gonna get another one and new arp studs but how do I find out what the...
Witch sensor is it on the box because I have another box here with all the sensors working properly. I could just swop it over see if it cures it.
No I tried that. Thought that myself lol.
I've just put a ca18 gearbox in my sr20 with my sr20 bell housing. But now the reverse light won't go out any ideas
http://i1167.photobucket.com/albums/q623/shaneyboi88/EB870F22-430B-4920-A455-860A601945C8.png
http://i1167.photobucket.com/albums/q623/shaneyboi88/79CB0BAD-A3E2-4DE4-A159-923B51A1F3B8.png
Anybody know Where to get replacement os giken gears from for my sr20det box I've stripped one of mine.
Ok thanks guys.
And do I put one of them cogs on the sprocket from exhaust side?
I've got a pair of adjustable cam sprockets and gonna take my vvt out and fit these. Do I need a smaller bolt that normally goes through the vvt sprocket ?
I've had a look on here but can't find a thread showing the best way to get around the removal of the dash. Has anyone seen a thread like that or point me in the right direction. Thanks.