Search:

Type: Posts; User: skyshack

Page 1 of 20 1 2 3 4

Search: Search took 2.06 seconds.

  1. Pin hole in rad or rad top/end tank seal?

    Pin hole in rad or rad top/end tank seal?
  2. Thread: S13 Executive

    by skyshack
    Replies
    3
    Views
    132

    Depends on when it was sold, early ones will be...

    Depends on when it was sold, early ones will be on H plate, late on J. All "Exec" are series 2 and will have VIN like, JN100RS13U020nnnn with small brakes or JN100RS13U022nnnn with 280mm brakes built...
  3. Replies
    10
    Views
    237

    It posts message but says "database error".

    It posts message but says "database error".
  4. Replies
    10
    Views
    237

    Utterly borked.

    Utterly borked.
  5. Replies
    6
    Views
    186

    Sticky pad or piston? Pads should slide in the...

    Sticky pad or piston?
    Pads should slide in the calliper, any binding can hold them on and as the back plate expands when hot it gets worse under frequent application.
    Pistons should move back under...
  6. Replies
    4
    Views
    92

    That's not the same as S13. S13 both ports are in...

    That's not the same as S13. S13 both ports are in line and are stubs that a 16mm hose fits on.

    Simple to test. Check it's got continuity on the heater coil and is not shorted to the body. Look...
  7. Replies
    4
    Views
    92

    That's not the same as S13. S13 both ports are in...

    That's not the same as S13. S13 both ports are in line and are stubs that a 16mm hose fits on.

    Simple to test. Check it's got continuity on the heater coil and is not shorted to the body. Look...
  8. Replies
    9
    Views
    157

    And the S13 is so simple all you need is a...

    And the S13 is so simple all you need is a multimeter and a test bulb.

    When checking for 12V or feed from a dropper resistor put a bulb on it. Poor connections / splices in loom can show 12v on a...
  9. I thought the whole idea of Ehra-Lessien was that...

    I thought the whole idea of Ehra-Lessien was that they could claim it as 2 way while doing a circuit as the road is a long oval. Like a DC with very wide median strip.

    Seems they need some paint...
  10. Replies
    2,097
    Views
    222,703

    I must learn to stop clicking these links to...

    I must learn to stop clicking these links to e-bay and start pasting them to a private window. My mail from E-bay is full of crap "Selected for you: Peugeot Cars and more" and "Renault Classic Cars...
  11. Replies
    78
    Views
    12,169

    I got a brand new stock rad off e-bay years ago,...

    I got a brand new stock rad off e-bay years ago, OEM fit.
  12. Replies
    9
    Views
    157

    Pull the fuel pump fuse. Mark position and remove...

    Pull the fuel pump fuse. Mark position and remove CAS. Switch on, put a rod against ear lobe and on each injector in turn, listen for clicks as you turn CAS. Unplug and put a 5W bulb in the plug, if...
  13. Replies
    9
    Views
    229

    Test feeds to coils and injectors with a 21W...

    Test feeds to coils and injectors with a 21W bulb. I had a corroded splice in loom under engine bay fuse box. Meter showed battery volts on all but bulb showed that the injectors didn't have current....
  14. Thread: S15 v gt86

    by skyshack
    Replies
    70
    Views
    6,795

    But Wisefab can't deliver 70 degrees on a GT86 or...

    But Wisefab can't deliver 70 degrees on a GT86 or 350Z or 370Z. They can for BMW and 200SX.

    And "a few washers" on a GT86 steering rack will only match stock 200SX.
  15. Replies
    7
    Views
    174

    For no cutting you are best off with SAAB or...

    For no cutting you are best off with SAAB or Volvo intercooler that sits between slam panel and rad.
  16. Replies
    30
    Views
    713

    I prefer Carplan "get in there" graphite...

    I prefer Carplan "get in there" graphite penetrating fluid to plus gas.
  17. Thread: S15 v gt86

    by skyshack
    Replies
    70
    Views
    6,795

    Seeing as this has been resurrected. But a...

    Seeing as this has been resurrected.


    But a stock S13 will be sliding with much more style as its yaw angle will be around 40 degrees instead of 30. So how easy is it to maintain the slide in a...
  18. Replies
    8
    Views
    180

    And then there is this SUV version?...

    And then there is this SUV version?
    https://carbuzz.com/news/nissan-390z-concept-rumored-for-tokyo-motor-show-reveal
    https://cdn.carbuzz.com/gallery-images/original/273000/100/273171.jpg
  19. Re :?? Harmonic damper. With every firing...

    Re :?? Harmonic damper.

    With every firing stroke the crank gets an impulse that twists it. At some engine revs these match the natural frequency or a harmonic of the cranks torsional frequency,...
  20. Replies
    54
    Views
    4,339

    Anyway back to the original issue that Dastardly...

    Anyway back to the original issue that Dastardly was having, did switching to Zen sort it for you?
  21. If you take the lid off the ECU, with plug at top...

    If you take the lid off the ECU, with plug at top and rom at bottom RHS you will find there are 2 transistors just above 1/2 way up on LHS and marking on a vacant space for a 3rd, spread across the...
  22. CA18DET ECU is to all intents a BBC model B,...

    CA18DET ECU is to all intents a BBC model B, running at 1MHz.

    It gives up on closed loop lambda operation at 3200 rpm as it can't do the calcs fast enough.

    The trick is it has a programmable...
  23. Last S13 for Europe was made in Dec 93. That's...

    Last S13 for Europe was made in Dec 93. That's before NCT high idle and lambda test date of 1 Jan 94 so you should get a Nissan dealer to give you letter stating date of manufacture.


    If all your...
  24. Replies
    1
    Views
    148

    "Services" not "systems"....

    "Services" not "systems".
    http://www.performancetuningservices.co.uk/
  25. I don't think so. It's on the injector / ignition...

    I don't think so. It's on the injector / ignition loom, I think that goes across the bulkhead and into the cabin under the wiper motor. page EL-104.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4