it work good , from the engine i can intake , the other way i cant't blow
Type: Posts; User: albator.korn
it work good , from the engine i can intake , the other way i cant't blow
STEVE , the 4 are locked , and i can't move , the rear burn with the action of the engine and the front stay locked
i think yes , on the valve , an arrow with " engine " writ on it and when i unplug the plenum side of the hose , i can intake the air but i can't blow it
it work fine , but the wheels stay bloked and i need to remove the pressure ( or vac ) to the mastervac , to unlock the wheels ,..... and the air regulator on the Mastervac hose work fine too
hi , its a d2 and an Oreca regulator
hi all
i have a problem with my rbs13 drift car
when i brake with my Hydrolic e-brake or when i stop the car with an heavy braking , the wheels stay blocked , and i need to unplug the air...
i found the problem , timing belt ... just 1 step on the exhaust pulley , , i change the bellt by one with 3 point fr the install ... and bingo
thanks for your help mates
i haven't consult port ;(
my injectors are the stock r25det , i change 4 by sr20det s14 injectors, they are the same ,
the maf it's the maf delivered with , the engine , i test it and it's lok like ok , then i test the...
up ? i really need your help
the problem start at first time , just after the swapp
for the fueling , i have walbro pump , and a stock ecu
i make the same swap to a s14 and don't have this problem
as the air regulator...
air flox meter pluged , wiring is good , and other maf tested , ...
Hi all ,
i have a probleme on my rb25det s13
the engine don't wan't start when the air regulator hose is plug on the piping
when i start with the air regulator unplugged , it start ,
...
thanks dunkz ,
but all it's allready install , and just the wiring was the problem
hi , all
i started my r33 serie 2 rb25det connvertion on my ca18det s13
all it's ok , and fitted , but ....
:annoyed: i dont find good information for the wiring on the s13 chassis
...
User name: albator.korn
200sx converted: S13 91'
RB engine used: serie 2 RB25DET, td06 20g,
Current state: not finish yet, need your help to finish the wiring converision s13 ca18det -->...
i can you repair hks turbos , like gt2830 ball bearing and what's the price
HI all,
i've got a problem ,
i've got a power fc for a friend s13
but i ont have the fc commander
if got a fc dataloggit
up please
or
http://www.driftworks.com/catalog/products/poly-bushes-nissan-s13r32-rear-lower-arm.html
http://www.driftworks.com/catalog/products/poly-subframe-bushes-nissan.html
do you think it's that kit i need to buy ??
thanks
i want to buy locking collars, but my subframe bushes was really die , in the first picture you can see 4 /5mm from the bushing to the top
i think i can use locking collars only if the bushes was...
hi all
I ve got a problem with my f*** s13
http://albator.korn.free.fr/s13/silent1.jpg
http://albator.korn.free.fr/s13/silent2.jpg
http://albator.korn.free.fr/s13/silent3.jpg
this bushing...
hi
http://www.h-dev.co.uk/index2.php?page=home
you can find that here , the best products for your car
krlos
but when i want to buy an kaaz lsd , it's write " only for vlsd equiped"
hi all ( sorry for my bad english)
I have a problem and I shall like your helps.
I have a diff without vlsd on my s13 91'
can i put an aftermarket lsd like kaaz or cusco
Which modifications I...