Search:

Lads and ladies, I’m wondering if someone can offer some advice.

I’m rebuilding the front end of a W164 Merc ML320 and need to change out the radiator which has oil lines going to it.
I know one...

My S13 taxed & tested once again... owned her since 2005 :)

2018 should be a year of getting “back in the game”

Now based in Warwickshire

Great story behind this, and great respect for the plans. All the best with the project and the little things that are going to start turning up!

Spot on guys! erryone loves free stuff

Cheers bud, will have to get a quote from Sodablasting and see what they want

Cheers Paul, yeah i'd be keen to know about the blaster in Cov

Can anyone recommend a good blaster & powdercoater in the West Mids?

Got my rear frame and arms off the car for refurb at the mo, and want it all tarted up.
Been getting quotes from £100 up to...

I'm also thinking about Japfest if I can get the '13 rear end back together in time! Anyone going in convoy?

Has anyone local got a timing gun I can loan in exchange for beer tokens?

Has anyone got a decent multipiece kit? Need to hire one for a couple of weeks..

Thanks

Warwick uni quoted me £15+Vat each to 3d print them, but that was in ABS not Nylon.

They said that the printer capable of handling Nylon is a pricey bit of kit?

What time will u be around til? Got a day out at West mids Safari park on Monday!


Sent from my iPhone using Tapatalk

Hi,

Do you sell 2.5" (pretty sure that's what the rest of the kit is) hot pipes to link the turbo to the intercooler hot side?

Something like this :...

No code, ECU test showed 55 no fault.

So this turned out to be a faulty ECU temperature sensor, on removal it had a layer of crap covering half of it.
Had ordered a new one, so replaced it and it runs sweeter than ever before. Making me...

Unfortunately I don't have a gun.

It's clearly overfuelling like crazy from startup, as I need to remove the fuel pump fuse to get it started.
If I don't it stinks of fuel when I crank it.
From...

So, checked splines.. all good there. Cleaned AFM, and IACV. No change.

Ran it and disconnected the lambda when running, zero change. Would have expected a drop, or even rougher running?
Or will...

Nice one, cheers...haven't tried the idle. Don't think that could cause the over fuelling though?

Starting to think that the AAC is amplifying the problem, have run it disconnected today and it's...

Ok, so this seems to be caused by a combination of two things..

1. The hose between the turbo inlet flange and AFM had worked loose slightly at the turbo so unmetered air was entering the system....

Sorry forgot to mention that it's had the hot start solenoid bypassed already.

Used to be able to do a boost leak test on the 300ZX by fitting a plug in the inlet with a tyre valve in it,...

Ok, so have searched all the above issues and not been able to find anyone who's had the same combination of issues as me.
I think the issue is either going to be a boost leak, AAC problem or...

Speaking of meets, all seems quiet in the west mids?

May not be the right thread, but I have found a Farmer who is converting an old barn into 6 units. Each unit about 1.5 S13 width by 1.5 S13 length.
Have power and running water and are on a farm...

Can anyone recommend a good 4 wheel alignment shop in the Warwick/Leamington area?

Thanks

Cheers Ste, I've been living in China but couldn't part with her so just garaged her and had a tinker now and again when I was home