Search:

Type: Posts; User: m17ch

Page 1 of 4 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    114

    That's fine, it's a hydraulic tensioner.

    That's fine, it's a hydraulic tensioner.
  2. It doesnt work at all or it's not correct. If it...

    It doesnt work at all or it's not correct. If it works, but points wrong speed values, indeed your speed sensor is from the s14 (i.e gearbox), which is different to the s13 ca18 sensor.
    If it...
  3. Replies
    4
    Views
    293

    Thanks for the info! So s14 fan shroud and s13...

    Thanks for the info! So s14 fan shroud and s13 fan shroud for sr20 are identical is that correct?
  4. Replies
    4
    Views
    293

    CA18 fan shroud on sr20 swap?

    Hi guys, I've got an SR20 swap coming up for my CA18 equiped s13. I plan to use the stock viscous fan, I figured the standard ca18 viscous fan won't fit, how about the fan shroud? Does the 180sx use...
  5. Replies
    21
    Views
    488

    The Alfa should be the 166 TI as it's quite a...

    The Alfa should be the 166 TI as it's quite a heavy boat :)

    The Megane discs are 5x114.3 with center bore of 66.1mm, so the same size as the Nissan s14/skyline etc.. hub. Probably the offset will...
  6. Replies
    21
    Views
    488

    The cheaper option for Evo size brembos is Megane...

    The cheaper option for Evo size brembos is Megane 3 RS calipers and custom adapters.
    Refurbished/new calipers are quite cheap example
    plus Megane 3 rs disks again dirt cheap example and...
  7. Thread: R8 coils removal

    by m17ch
    Replies
    11
    Views
    518

    http://www.maxxecu.com/webhelp/wirings-connector_p...

    http://www.maxxecu.com/webhelp/wirings-connector_pinouts-ignition_coils.html

    Depending on which shorter coils you'll get, it's possible that you have to repin the harness.
    As with the two...
  8. Pretty sure it sticks out about 1-2cm, dont have...

    Pretty sure it sticks out about 1-2cm, dont have the right measurements, tho...
  9. Replies
    14
    Views
    312

    I went the custom route. Dont regret it a second....

    I went the custom route. Dont regret it a second.
    It's full stainless 2.5" turbo-back with 2 middle Vibrant silencers and 1 backbox (shotgun tips, so no bung possible) again from Vibrant. All...
  10. Thread: Wheel size

    by m17ch
    Replies
    8
    Views
    588

    From my experience the fronts won't clear the...

    From my experience the fronts won't clear the suspension. I've had 16x8 et30 and that would be the closest to the strut I would get.
    Now I'm trying to fit 17x9 et25, and while the rim clears the...
  11. Replies
    24
    Views
    948

    Actually, if you don't support them somehow from...

    Actually, if you don't support them somehow from rattling around, they tend to crack the sparkplug...
    Usually, CA18 guys drill the coil cover to fit them tight and secure.
  12. Replies
    24
    Views
    948

    NGK U5014 and nothing else.

    NGK U5014

    and nothing else.
  13. Here is a guy, who is popular in the facebook...

    Here is a guy, who is popular in the facebook ca18det group. http://sxoc.com/vbb/showthread.php?578158-VAG-ignition-coil-conversion-project!-Have-your-vote!
    As far as I remember the 115R coils are...
  14. Thread: Speaker upgrades

    by m17ch
    Replies
    9
    Views
    558

    If you have some free time as ^ suggests, custom...

    If you have some free time as ^ suggests, custom adapters are worth it. I've got Ground Zero component system 5x7" with the tweeter placed on the dash.
    The adapter is made out of...
  15. Replies
    13
    Views
    974

    The most cost effective in my opinion is front...

    The most cost effective in my opinion is front 350z brembo and z32 rear sumitomo. Cheap discs cheap pads etc.
    I assume you've got the 5 lug conversion?
  16. Replies
    28
    Views
    582

    For sure... Don't know from which car your disks...

    For sure... Don't know from which car your disks are :)

    Sent from my ONEPLUS A5010 using Tapatalk
  17. Replies
    28
    Views
    582

    The rear discs should be: Diameter: 295mm...

    The rear discs should be:
    Diameter: 295mm
    Height: 64mm
    Thickness (new/min): 18/16mm

    Check if yours are the same size, maybe your height is different...
  18. If you're a bit more open minded you can have a...

    If you're a bit more open minded you can have a look on www.turbozentrum.de
    At the moment they have 20% off everything instock.
    ...
  19. Goods received, really quick service! Thank you!

    Goods received, really quick service! Thank you!
  20. Pmd :) will write an email as well.

    Pmd :)
    will write an email as well.
  21. Replies
    22
    Views
    1,069

    Before I changed my bearings I've recorded a...

    Before I changed my bearings I've recorded a video/audio of it.

    https://www.youtube.com/watch?v=F8yoHeNKw6g

    I could hear the rattle only when cold and around idle. I changed the bearings and...
  22. Here are the pictures. Both adapters are made of...

    Here are the pictures. Both adapters are made of steel. Might switch to a braided hose for the lower one in the future. [emoji6]...
  23. Then, I'll test the tensile properties of the...

    Then, I'll test the tensile properties of the fitting :D :wack: . Dont think it would matter that much, it will take ages to break, as both sensors are quite light and the fitting is short and thick....
  24. Oil temp and pressure gauges without sandwich plate CA18DET

    Hey guys,

    I couldn't find any information so I tried myself to figure it out.
    As i recently installed an oil cooler with a Mocal plate, I didn't like the idea to stack two plates one over...
  25. Replies
    12
    Views
    474

    I installed Nismo engine, gearbox and subframe...

    I installed Nismo engine, gearbox and subframe mounts, and the stick is shaking less, but still annoying.
    You might want to go to another brand, if you want zero play.
    Also the shifter bushing...
Results 1 to 25 of 78
Page 1 of 4 1 2 3 4